Waves Vocal on Startup, Lynx Aurora... and Raid???

[crypticglobe]

Hey all,

Ok... I am still a newbie here. However, I got my HD core card and PT 7.3 and I am getting it all going so far.

I got it all installed. Everything looks good. I have a few weird things and it would be great if someone could help me out.

1. On startup, it always asks for a folder for Waves Vocal Bundle (I own it). No matter what folder I select... it jumps back to the same window. What's going on here??

2. I am using Lynx Auroras with the LT-HD card. So far it all seems to be working great... but I can't figure out how to get it in the mode that allows me 16 analog i/o AND 16 digital i/o at the same time. Anyone have any ideas??

3. I have been told by Digi that you can't use PT HD with Raid 0 arrays. However... I have 2 raid zero's on this system... and it seems to be working fine. Am I headed for some unknown disaster... or is this old information? It's not too big a deal because this system has all removable drives and I can just pull them out if I need to and stick single drives in.

Thanks in advance!!!

[dods]

Hi,

On the Lynx you press & hold the To Analog Out button for a couple of second, then start pro tools. Out 9-16 will show on the 2nd 192i/o on the setup. Hope it helps...

[Brandonx1]

Hi crypticglobe,
For pro tools, Raid is not supported. Your not directly going to see any problems with the system, it just will not be as stable as a non-raided set up.
Peace,
Brandon

[Brandonx1]

Hi crypticglobe,
For pro tools, Raid is not supported. Your not directly going to see any problems with the system, it just will not be as stable as a non-raided set up.
Peace,
Brandon

[Bob Olhsson]

I had that problem until I removed the Vocal_WavesShell-DAE 1.0.dpm from the digi plug-ins folder.

[crypticglobe]

I had that problem until I removed the Vocal_WavesShell-DAE 1.0.dpm from the digi plug-ins folder.

Thanks Bob. That did the trick here too.

Oh... and to all... I see a lot of questions about what PC... I am building some super rock solid HD machines over here... QUAD Core. I begin testing on an Octo-Core in a week or two. I ain't the cheapest... but I build a hell of a machine for PT or Nuendo. Running both here... and several clients machines now too.

[crypticglobe]

Thanks. But what kind of stability issues will I see? I fired up some pretty "honkin big" sessions and got no problems. What should I be seeing??

Thanks,