Track View selector

[ByPass]

Hi all,
I have just receive my D-Control 24 and i have a question:
Is it possible to change the track view selector ?
To switch waveforme --> Automation
Regards
nicolas

[Mikey MTC]

D-Control is only 16 or 32 faders (or more). Maybe you mean D-Command?
No matter - if you command-control click a fader you get the volume automstion line. IF you command-control while pressing a channel's "select" button this switches that track to waveform view. Same for mute button, send levels, etc etc.

[Drew Mazurek]

Mikey, I think you mean Command-Control and then touch a fader to show the volume.

[Mikey MTC]

Thanks Drew. Of course I certainly did mean that.

[Brent_Sydney]

Alternatively a good keyboard shortcut for that is holding down Ctrl + Command and toggling left and right on the arrows on your kb.

[ByPass]

Thanks,Thanks,Thanks
In windows Xp is :
ctrle-option and touch the control to alternate the track view selector.

many Thanks

bypass

[Chris Lambrechts]

Control + Command and then touching the fader or encoder for any automatable parameter would bring up that parameter in the track view display.


Pan / send levels / plugin parameters / anything you can bring up on a fader or touch sensitive encoder on your controller.

As already mentioned ... selecting the mute switch will bring up that one and the select switch will always bring you back into waveform view.

Chris