fcb1010 w/eleven rack

[Rob487]

I'm trying to get the behringer fcb1010 to work with the Eleven rack. I have the UNO chip installed. I just want the 1-5 to switch through rigs and 6-10 for stomp box. Plus pedal A - volume and pedal B - wah (of course wah only if enabled in the rig). I think I have read just about everything I could find about it but it seems the more I read the more confused I get lol. If someone can give me step by step on how to get this to work with the 11r or if they have a SysEx file I could use I'd greatly appreciate it. Thanks

[robertmonroe]

I have my FCB working good with Eleven Rack, I also have the UNO chip.

I set it up pretty good everything works, banks (a,b,c,d,etc...), presets, stomp boxes, wah and volume pedals, it all works!

I have the SYSEX File

Robert

[nxsneil]

Robert,

I'm still having a few probs setting up my FCB1010 would you mind emailing me your sysex file so I can compare please? to [email protected]

Thanks

[robertmonroe]

You can download from the links I posted here:

http://duc.digidesign.com/showthread.php?t=272127

[Rob487]

Thanks for posting. One question. I have the midi cables hooked up from the 11r to the fcb and back. Am I suppose to use a midi cable with a usb end to plug the fcb into the computer to use the editor? The way it is now when I check the firmware it says unknown. Thanks again for your help (I'm obviously new to this midi stuff).

[robertmonroe]

Use 2 MIDI cables. The "in" from the FCB goes to the "out" on the 11R. The "out" on the FCB goes to the "in" on the 11R. You need to use both cables to properly program the FCB.

Robert Monroe

[Rob487]

Thanks, yeah I have both cables connected.

[therealmf]

Do I need a USB-Midi-interface to load the SysEx-file?

[robertmonroe]

Originally Posted by therealmf

Do I need a USB-Midi-interface to load the SysEx-file?

No just plug the midi cables into the FCB and 11R and then connect the 11R to the computer with USB cable. An fire up the FCB1010 editor.

Robert Monroe

[therealmf]

Now, THAT is cool ;-) Thanks, Robert!