Problems with Output to AMP 1

[Hansemann64]

Hello,
I got problems with the Output to AMP1. The signal arrives at the AMP but the without the effects or rigs, just the clean signal. Everything is OK by connecting a headphone. What's going wrong?
BR
Hansemann64

[junkgear]

The 11R allows you to send different parts of the output chain to the Amp outs.

To set the type of signal to send to the amp:
1.) Press and hold the Edit/Back button to show the User Options mode.
2.) Scroll to Outputs To Amp with the Scroll wheel.
3.) Press SW1 to enter the Outputs To Amp screen.
4.) Choose the output you plan to use to feed the amp, with the Scroll wheel.
5.) Set the Signal control to one of the following, using the first lit Control knob:
• Rig Input (no processing)
• Amp Input (pre-amp effects only)
• Amp Output (pre-amp effects and amp simu-lation)
• Rig Output (all processing)
• Rig Out No Cab (all effects and amp simula-tion, no speaker or microphone simula-tion)

[Hansemann64]

Many thanks. It works...