restoring Solo connections

[RCKPROD]

I've got session that somehow be corrupted. When loading my session the message "restoring solo connections" hangs for about 10 to 15mins before session open.. Help anyone?

My setup is:
G5 Dual 1.8 Tiger 10.4.6
PT 7.1cs8 HD2 ACCEL
192 I/O
Digidesign PRE

[Andre Knecht]

RCKPROD,

Just two days ago, someone else posted about this very issue. Here’s a direct link to that thread.

IHTH.
.

[RCKPROD]

got it........

Thanks Andre

[RCKPROD]

I try changing AFL or PFL and still it hang for 10 the 15mins it the restoring solo connections anyone please help....


I've got session that somehow be corrupted. When loading my session the message "restoring solo connections" hangs for about 10 to 15mins before session open.. Help anyone?

My setup is:
G5 Dual 1.8 Tiger 10.4.6
PT 7.1cs8 HD2 ACCEL
192 I/O
Digidesign PRE

[Andre Knecht]

Unless you have a very specific need for AFL or PFL soloing, stick to Solo-In-Place.

Session corruption is best dealt with by creating a new session with the same attributes (sample rate, bit-depth, etc.) and then importing everything (from the old to the new session) by way of the “Import Session Data” features.

While you’re at it, do some preventing house cleaning (trash databases, etc.) as detailed in the “General Troubleshooting” sticky.

IHTH.
.

[RCKPROD]

I have try building a new session and import track per digidesign tech still no go and also reinstall digidesign software, update plug-in...One thing I can say is that when I use an instrument track with an xpand or B4 ll, or and instrument save on an instrument track it hangs at "restoring solo connections".....


When loading my session the message "restoring solo connections" hangs for about 10 to 15mins before session open.. Help anyone?

My setup is:
G5 Dual 1.8 Tiger 10.4.6
PT 7.1cs8 HD2 ACCEL
192 I/O
Digidesign PRE