|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
please help on mirroring outputs 1-2 to s/pdif outputs!
hi there,
i need to send the main mix outputs both to analog outputs 1-2 and spdif LR outputs at the same time. I'm running PT 7.3.1 with digi 002. I've seen there's a way to send the signal to multiple outputs just ctrl-clicking on both analog 1-2 and spdif LR outputs on any single track's output popup menu, but if i put plugins on the master fader i obviously can hear just one of the two output pairs processed by plugs at the time depending on which output pair is selected on the master fader. The ctrl-click trick doesn't work on the master fader. Is there a way to just mirror analog 1-2 outputs to spdif LR outputs so i don't have to open 2 master faders with the same plugins on each one?? I checked the reference guide but to be honest i couldn't find clear instructions for this for LE systems. any advice? thanks matteo |
#2
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Quote:
__________________
Mac Pro 3.7 Quad Core Intel Mac OS X 10.13.2 PT Ultimate HDX 2019.10 64GB RAM HDX I/O 16x16 Analog HDX I/O 8x8x8 |
#3
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Hi, thanks for the reply,
unfortunately it looks like Protools LE hardware setup doesn't have that option, maybe you can do that only on TDM-HD. I thought about using an aux track but i was told aux tracks have a different processing headroom compared to master tracks, is that true?? i also remember many people discussed about using master tracks for mastering, limiting and dithering plugins... anybody knows other ways to mirror analog 1-2 outputs to digital spdif outputs in ProTools LE with digi002? DIGI tech? do you have an answer for me on this? |
#4
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Quote:
I think It's probably to do with the low latency monitoring option which only works with the analogue outputs. I'd like to know if It's possible with the 003 though.................anyone?
__________________
] |
#5
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
the master faders have different signal flow than stereo aux tracks. for limiting plugs, master faders are not good because the plugs are post fader (meaning the compressor/limiter stops working as you start bringing the fader down). For dither though, masters are better.
Master faders don't allow sends. However, for a stereo aux, you could create a send (to spdif) and set it to 0. This would mirror your main output to spdif. you could also, hold control and select a multiple output sending it to both at once. two master faders are going to require you to duplicate what ever plugs you have on the first to the second (doubling your system resources used for the master). I'm pretty sure you can do multiple outputs in the hardware setup window on LE. I guess I can't remember for sure, but am almost positive that I've done it on my LE rig. Maybe someone else can advise on that.
__________________
Mac Pro 3.7 Quad Core Intel Mac OS X 10.13.2 PT Ultimate HDX 2019.10 64GB RAM HDX I/O 16x16 Analog HDX I/O 8x8x8 |
#6
|
||||
|
||||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Quote:
|
#7
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Quote:
Because the Master Fader should remain at 0.0 Find reduction on the bus, individual channels or plug in gain stages. |
#8
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
I just meant fade outs at the end of the song...if applicable.
__________________
Mac Pro 3.7 Quad Core Intel Mac OS X 10.13.2 PT Ultimate HDX 2019.10 64GB RAM HDX I/O 16x16 Analog HDX I/O 8x8x8 |
#9
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Quote:
pre or post fader is not a problem for me, i would always stay at 0 on the mix buss fader anyway. It would be interesting to know from DIGI if putting mastering plug-ins like limiters etc.. on a stereo aux produces exactly the same sound quality than putting them on a master fader, do they have different headrooms? do they react in the same way when the signal is brought to extreme levels with peaks on 0db? |
#10
|
|||
|
|||
Re: please help on mirroring outputs 1-2 to s/pdif outputs!
Well you can put a trim plugin between your limiter and your dither...e.g. Sonalksis FreeG.
__________________
`My name is Pro Tools HD, King of Kings: Look on my works, ye mighty, and despair!' Nothing beside remains. Round the decay Of that colossal wreck, boundless and bare, The lone and native DAWs stretch far away. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mirroring Analog 1-2 & S/PDIF outputs Mbox 2 pro | onepercentfree | macOS | 0 | 12-27-2013 01:23 PM |
Mirroring Outputs... | padrino | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 5 | 07-07-2007 03:22 AM |
Mirroring Analog 1-2 and S/PDIF outputs | telejustin | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 07-03-2007 03:13 PM |
s/pdif mirroring analog outputs? | gamblor | Pro Tools TDM Systems (Mac) | 9 | 06-12-2006 01:58 AM |
Mirroring outputs | Gordon -10 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 06-26-2005 04:54 PM |