|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#21
|
|||
|
|||
Re: Antelope 32 HD delay compensation issues [SOLVED]
Quote:
I also went through the list and selected WC for all the other interfaces and then ended with selecting the first unit (Red Line16) as "Loop Master" Exactly how it was before. All termination is correct and I have it setup just like you do. Red sending clock to BB which distributes to the 3 other units. The BB has the termination port LED lights also indicating proper termination. I have 4 very basic test sessions at 4 sample rates. 44.1/48,88.2/96K with a test tone output to the various interface and an audio file set to output to main outs. I can easily start with 44.1 then shutdown the session. Then go to the 48K Session and open it. Then go back to 44.1 and it works. As soon as I go back to 48K protools swods and hangs but all the interfaces are clocked and locked. It will then stop swodding but then everything is unresponsive and I have to force quit and restart.Its something in the software somewhere. Maybe the driver? I can't figure it out. There are times where I can open sessions with different rates 4 times in a row but beyond that it gets confused some how. I am on 10.12.6 Sierra. Could it be that? I have done all the trashing and other basic troubleshooting. Only other thing is to maybe move the order of the interfaces but I think the Red should be master in port 1. The last bit of info is I am only using the first DIGILINK out of the Red as I don't need the DANTE ins and outs. Any Ideas?
__________________
Mac OS 12.7.2 Monterey (19H15) Mac Pro 2013 (Trashcan) 6 Core 64 gigs Ram, Red Line 16, Native Thunderbolt, ProTools Ultimate 2024.3.1 Macbook Pro, 2019 (15,1) Mac OS 13.6.6 Ventura,32 Gigs Ram,2.3 GHz I9 8 Core ProTools Ultimate 2024.3.1, Apollo 8 Silver,TwinX. |
#22
|
|||
|
|||
Re: Antelope 32 HD delay compensation issues [SOLVED]
Quote:
It happens occasionally only because Pro Tools only gets caught with its pants down trying to find the hardware when the hardware isn't ready yet only sometimes. It doesn't really matter where the RedLine is -- if it disappears when it changes clocks, then the hardware has changed as seen by Pro Tools and Pro Tools will have an issue. This happens with the MTRX too but it does it more gracefully than the SWOD and you can just try reopening right away and it will work the second time. Once upon a time in 2017, the Pro Tools software change over and read of the hardware didn't have a mismatch of cycles and it never happened. Then the HDX driver changed or something in I/O or Playback Engine design in Pro Tools software and it's happened ever since occasionally. The only thing, is once Pro Tools is open, switching to sessions with different sample rates doesn't have an issue with the MTRX. It only happens if the last session that was open when Pro Tools was closed is not the same sample rate as the first session opened when Pro Tools is reopened. But I imagine the RedLine might be a little slower than the MTRX in doing sample rate change overs for how it presents itself to the digilink connector and so gets caught out more frequently.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#23
|
|||
|
|||
Re: Antelope 32 HD delay compensation issues [SOLVED]
Quote:
__________________
Mac OS 12.7.2 Monterey (19H15) Mac Pro 2013 (Trashcan) 6 Core 64 gigs Ram, Red Line 16, Native Thunderbolt, ProTools Ultimate 2024.3.1 Macbook Pro, 2019 (15,1) Mac OS 13.6.6 Ventura,32 Gigs Ram,2.3 GHz I9 8 Core ProTools Ultimate 2024.3.1, Apollo 8 Silver,TwinX. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Protools 12 Delay Compensation Issues | jay-clark32 | Pro Tools 12 | 32 | 08-30-2016 10:05 AM |
12.5.2 delay compensation issues | dropking | Pro Tools 12 | 3 | 07-26-2016 02:45 AM |
Delay Compensation issues in PT11/12 | ggegan | Post - Surround - Video | 11 | 07-09-2015 05:54 PM |
Issues with Delay Compensation | ilee | Pro Tools 9 | 4 | 12-26-2013 04:25 PM |
Delay compensation issues | studer80 | macOS | 2 | 12-11-2012 06:49 AM |