sends to faders

[The Saxplayer]

Hello,

I searched quite a bit, and some posts claim that I can flip the faders on the S3 so that they reflect the levels to a certain send.

But I did not find out how.

Can someone tell me if this is possible and how?

Thanks a lot

[RogerPaolo]

You have to press the soft key on the left hand side of the faders that has the AUX label. Now the lower OLED's show your aux sends per channel, and you can go trough the different sends with the Page keys. When the desired send shows up on the OLED you press the FLIP soft key, now you can control the send with your fader. Hope I explained it well...

[The Saxplayer]

Yessss... !
That is cool.

Thanks

[RogerPaolo]

it is! nice for writing automation in Touch mode...

[antonis]

Originally Posted by RogerPaolo

You have to press the soft key on the left hand side of the faders that has the AUX label. Now the lower OLED's show your aux sends per channel, and you can go trough the different sends with the Page keys. When the desired send shows up on the OLED you press the FLIP soft key, now you can control the send with your fader. Hope I explained it well...

Is that possible on the Control app as well?