|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Command 8, Win 7 x64 and PT 10 Troubleshoot
Hi,
I''m pretty new to PT and brand new to a used Command 8. I'm hoping for some basic 'trouble shooting' tips to determine if my problem is due to configuration or an issue with the Command 8 itself. 1. I previously successfully had other controllers setup using the HUI mode and selecting the appropriate midi routing. 2. I have the Command 8 midi installed and apparently working properly: Device manager shows the Command 8 device in "Sound, video and game controllers." 3. I went to setup/ peripherals, control surface tab, removed the other controllers, selected Command 8 and then selected MIDIIN2 (Command/8 Midi Port1) for Receive From and Command/8 [Emulated] for Send To. 4. When the selection was made the Command/8 immediately reset to the proper settings, i.e., mirrored the mixer faders, pans, mutes, etc. 5. However, almost immediately the 'unable to communicate' message flashed on the screen and the Command/8 appeared 'locked,' i.e., no parameters could be changed. 6. I then tried routing it 'stand alone' in another DAW, to see if it put out any midi activity when I moved the faders or encoders. The DAW did not register any midi activity ... but I don't know if that is normal when it is only hooked up USB and not sending from the 5-pins. Any suggestions as to how to sort this out would be ... it goes without saying, but I'm saying it anyway ... immensely appreciated.
__________________
PT10 Win7 x64 Dell 690P Dual Dualcore Xeon 3.0Ghz 16Gb Ram, UAD2 Quad (2), Steinberg MIDEX8 (2), RME HDSPe and A&H ZED R16 FW. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help me troubleshoot this? | michael c | Pro Tools TDM Systems (Mac) | 7 | 12-10-2008 10:22 PM |
ProTools Troubleshoot Question... | swizkid | Pro Tools TDM Systems (Mac) | 5 | 07-24-2008 12:30 PM |
how many users know how to use& troubleshoot OSX? | DesertDude | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 22 | 01-28-2003 12:05 AM |
Troubleshoot my website anyone? | Captain_Pants | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 07-02-2002 03:12 PM |
D-Vert troubleshoot | NoviceDollars | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 7 | 07-14-2001 11:25 AM |