|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Low Latency Monitoring question
Hello,
Since I have issues with clicks/pops at low buffer sizes, I typically use higher buffer rates along with low-latency monitoring when tracking. The problem comes when tracking vocals. I rely on plugins for reverb, and singers typically want to hear reverb on their voice during tracking. So when I have low-latency monitoring enabled, they obviously don't hear any plugins that are present on the vocal track. What I have been doing is turning OFF low-latency monitoring. I mute the vocal track that they are recording onto and the vocalist hears the direct signal of the mic. I then create a separate track with the same input as the vocal track and enable Input Monitoring. I put a reverb plugin on it, and set the mix to 100%. This works, because the latency is a non-issue when applied to JUST the reverb. So the singer is hearing his direct signal as primary, and a reverb from pro-tools. Is there a better way to do this without having to mute the singer's tracks? Then I have to unmute them for playback. I feel like there's got to be a better way to achieve this....and I hope I am explaining clearly. Thanks! |
#2
|
||||
|
||||
Re: Low Latency Monitoring question
Better way would be turning low latency monitoring on and finding out why you cannot track at 256 or lower buffer
__________________
Janne What we do in life, echoes in eternity. |
#3
|
|||
|
|||
Re: Low Latency Monitoring question
Pro Tools 2018 should allow for reverb plug-in while Low Latency Monitoring enabled, as long as track output is to main outs 1-2
|
#4
|
||||
|
||||
Re: Low Latency Monitoring question
IMO, LLM is not needed to begin with -- most can monitor themselves while tracking at 256 buffer, myself included. Those that cannot, most are fine with 128 buffer. EVERYONE is fine with 64 buffer.
Math says 64 buffer means 64/48000 = 1.33ms which is equivalent of someone whispering to your ear 1.5 feet away. Surely you have had your monitor wedge somewhere far far away and still be able to perform? Or the drum kit, are you not able to play bass if your distance to kick drum is 2 feet or more? Sounds so ridiculous, right? Well the LLM in itself is just as ridiculous. I myself can monitor myself using 256 buffer. No problem. Using 512 there is a noticeable echo which makes it impossible. I don't care if there are sonic advantages going from 256 to 128 or lower because my brain only cares about the (absence of) noticeable echo. When I'm monitoring myself I don't need feelgood from mastered ready to release sounds, I only need the cue mix to be "fast enough".
__________________
Janne What we do in life, echoes in eternity. |
#5
|
||||
|
||||
Re: Low Latency Monitoring question
First, have you done all the optimizations? (Look at the "Help Us Help You" link.) If so, post a Sandra report, maybe people will have suggestions.
Run LatencyMon - with all programs closed - for 10 to 15 minutes. Maybe there is something causing the clicks and pops at a lower buffer. There was a Windows update that introduced latency issues. You need the Windows update from July 26 or later to resolve those issues. If none of the above help, try the Play/Record Fader "trick". In Preferences>Operation UNcheck "Link Record and Play Faders". Then, when the Track is in Record, drop the Fader to the bottom (Infinity) and leave the Fader when out of Record at Zero. Now when you put the Track in Record, no signal will go out from the Track and when you take it out of Record signal will go out.
__________________
Take your projects to the next level with a non-union national read at reasonable rates Demos: brucehayward dot com SonoBus Source-Connect: brucehayward Options for Remote Direction |
#6
|
|||
|
|||
Re: Low Latency Monitoring question
Make an aux with the reverb (100% wet) and use a bus send on the vocal cut track to send the desired amount of signal to it. I do that alon with separate auxes for subtle 1/4 note delays (or whatever time division feels right)
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Monitoring through headphones with Apollo 8 - when selecting Low Latency Monitoring | Mick335 | Pro Tools 12 | 2 | 04-10-2018 08:34 AM |
Question low latency monitoring on 3rd party gear? | ChuckS | macOS | 5 | 11-23-2011 12:53 PM |
lowest latency without "low latency monitoring" ? | music project | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 6 | 05-11-2010 08:40 AM |
Low latency monitoring question | tamasdragon | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 09-12-2007 12:13 AM |
Mbox zero-latency monitoring - H/W Buffer question | jhays | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 03-04-2004 12:40 AM |