Update 8.03 causes problems running win7

[YoRugMan]

Thanks very much DigiTechSupt - very informative, to the point where I'm increasingly intrigued as to Wavelabs' issues.

Well Wavelabs - get Jinging!
I'm looking forward to it.


.

[DigiTechSupt]

Originally Posted by fridrikur

I installed the offical driver 5.10.0.5058

Ok, I need to be sure of what you're doing here. The official driver is:

6.0.1_5.10.0.5058

If, indeed, you have one prior to that, it could be part of the problem.

Your signature, however, seems to indicate the correct driver version, so I'm a bit confused.

If you used the uninstall.exe from your Digidesign folder, that should remove all components. I would recommend doing that again, then uninstall the 410 and it's drivers. Go to Device Manager and make sure that there are no listings for the 410 or any devices with yellow exclamation marks next to them - if there are, right click and uninstall them.

Then restart and reinstall the M-Audio device driver and Pro Tools.

[Wavelabs]

Lets do this one at a time,. so you don't get confused.

Lets start with MIDI Meta DATA when exporting MP3 files Or bouncing to disk.

I asked to please refer to Wavelabs by Steinberg company.
Which was not done.
I know you have it some where.

Here is what I am talking about, please refer to picture below.
Where I was explaining before, how Meta Data in exporting (bouncing to disk)
or exporting to MP3.
The Meta Data in Protools should get memorized so I don't have to keep typing and typing over and over
each time I want to export an update of my bounced file or export of MP3 file.


This is now getting annoying.
Here is an example of what I am talking about.

http://i48.tinypic.com/htehb6.jpg

I don't want to keep typing the information over and over and over,
every time I want to export (bounce to disk).
Each tag should be memorized, so when I type a letter, a list comes up for me to choose if I am exporting the same file
with the same information.

Wavelabs remembers each tag info typed.
Protools should do the same as I requested before in previous post.



I don't know why people paint me as if I dont know what I am talking about
like im new to the business, and its just getting very upsetting.


.

[DigiTechSupt]

I know what you're talking about with MP3 meta data and I can see why you might think it useful. As mentioned in my previous post - Ideascale is where to go to put feature requests like this.

The other questions I had regarding MIDI, tempo matching, etc. still stand - it was mainly those I needed clarification on.

[Wavelabs]

I don't want to retype all this again.....lol
since you are already here and you already work for Digidesign.
you can point it out to the people at AVID.

Otherwise I can not clarify it with you since you might just refer me
over to the ideas section of the website again.
and doing this twice would really suk.

As to the rest,
I will post pictures and replies the best I can, justr give me a little time.
as I need to go through the motion.


.

[TOM@METRO]

Originally Posted by Wavelabs

Also, I also find it some what difficult to find the mouse courser
I would have to shake and shake the mouse to find the courser.
I don't know if this is a PT glitch or what, but the courser needs to be more visual
to be easier to find.

Here is one I could go for.

[fridrikur]

Originally Posted by DigiTechSupt

Ok, I need to be sure of what you're doing here. The official driver is:

6.0.1_5.10.0.5058

If, indeed, you have one prior to that, it could be part of the problem.

Your signature, however, seems to indicate the correct driver version, so I'm a bit confused.

If you used the uninstall.exe from your Digidesign folder, that should remove all components. I would recommend doing that again, then uninstall the 410 and it's drivers. Go to Device Manager and make sure that there are no listings for the 410 or any devices with yellow exclamation marks next to them - if there are, right click and uninstall them.

Then restart and reinstall the M-Audio device driver and Pro Tools.

I do have the '6.0.1_5.10.0.5058' version installed, and this is also the version that I did uninstall and reinstall. I also uninstalled PT8 using the digi folder. I also checked that there were no yellow exclamation marks in control panel. I in other words already tried all of your suggestions. But still no luck.

[fridrikur]

Originally Posted by DigiTechSupt

Your signature, however, seems to indicate the correct driver version, so I'm a bit confused.

Hello again. You asked me to make a sandra report and I did, but you haven't commented on this? Do you need more time to study the report?

[YoRugMan]

What ?!?

You seriously have to sign up online to use Jing ?

Can anyone suggest another screen-capture util ?


.

[TOM@METRO]

Originally Posted by fridrikur

Hello again. You asked me to make a sandra report and I did, but you haven't commented on this? Do you need more time to study the report?

I'm a little confused; looking at you Sandra report makes me wonder why you have chosen a 64-bit Operating System when you have so little CPU power and RAM. A 64 bit OS only comes to life when RAM exceeds 4GB and CPU resources plentiful. XP-32 requires less resource for the OS allowing more for Pro Tools. The first thing I would do is install XP in this system and go back to PT 8.0.1 cs1.