2 midis together?

[ossi69]

Originally Posted by DigiTechSupt

Can you post your image using any number of free image hosting services, then put a link to the image in your reply?

http://i1142.photobucket.com/albums/.../PT_screen.jpg

[DigiTechSupt]

Originally Posted by ossi69

http://i1142.photobucket.com/albums/.../PT_screen.jpg

Can you post a screenshot of your session, showing the MIDI in/out and VI that that each keyboard is routed to?

Either that or post the session file for us to look at?

[ossi69]

Originally Posted by DigiTechSupt

Can you post a screenshot of your session, showing the MIDI in/out and VI that that each keyboard is routed to?

Either that or post the session file for us to look at?

Not sure if this has info you need.
http://i1142.photobucket.com/albums/...T_screen_2.jpg

It has 2 instrument tracks and 2 midi tracks. (I added 2 midi tracks, but no difference)

How do I post session file? (Could I e-mail this?)

If you would post working "session file" with 2 diff instruments and 2 different midi controllers, I could load it up on my system, and see how its done.
Is this possible?

[DigiTechSupt]

I think I know what the problem is. I see in your previous post you said:

Instrument allows me to select AxiomPro61 Hypercontrol In "All Channells"

You should NOT be using Hypercontrol In. You should have a 'USB A' in available for the Axiom Pro.

Also, did you install the KeyStudio 25 drivers? I'm not sure that it should show up as an O2 - that's usually reserved for the Oxygen series, though they could share a driver. In any case - you should see a USB input for that keyboard available and that's what should be selected for the other Instrument tracks MIDI input.

I've posted a session file that works, though I don't know how it will open up or if it will show anything useful since you don't have the exact same keyboards (I used a Axiom Pro 49 and an Axiom 25).

2 MIDI Inputs session file

[DigiTechSupt]

Originally Posted by ossi69

Not sure if this has info you need.
http://i1142.photobucket.com/albums/...T_screen_2.jpg

It has 2 instrument tracks and 2 midi tracks. (I added 2 midi tracks, but no difference)

How do I post session file? (Could I e-mail this?)

If you would post working "session file" with 2 diff instruments and 2 different midi controllers, I could load it up on my system, and see how its done.
Is this possible?

You can post the session file using any free hosting service. http://www.dropbox.com is a good bet.

Alternately you can email it to me at : vi [at] digidesign [dot] com.

[ossi69]

Originally Posted by DigiTechSupt

I think I know what the problem is. I see in your previous post you said:
You should NOT be using Hypercontrol In. You should have a 'USB A' in available for the Axiom Pro.
2 MIDI Inputs session file

1. I used ur session file and changed instruments to mine.
2. Keystudio-25 uses O series driver (No Changes)
3. Changed Axiom Pro from hypercontrol to USB A
Couple things I noted. You have Default Thru Instrument None, and mine will not produce any sound with this (I had to change it to Follows first selected Midi Track). Also noted your second Instrument uses "Port 1" (In Midi Input Selector) I cannot find "Port Settings" on my setup.

I am using MobilePre USB Hardware, and both my usb keyboards connect directly to computer via USB. Since I am unable to select Thru Instrument to NONE, I bet this is what the problem is. Using 64bit win7 with 8.0.4cs2.

[DigiTechSupt]

Originally Posted by ossi69

1. I used ur session file and changed instruments to mine.
2. Keystudio-25 uses O series driver (No Changes)
3. Changed Axiom Pro from hypercontrol to USB A
Couple things I noted. You have Default Thru Instrument None, and mine will not produce any sound with this (I had to change it to Follows first selected Midi Track). Also noted your second Instrument uses "Port 1" (In Midi Input Selector) I cannot find "Port Settings" on my setup.

I am using MobilePre USB Hardware, and both my usb keyboards connect directly to computer via USB. Since I am unable to select Thru Instrument to NONE, I bet this is what the problem is. Using 64bit win7 with 8.0.4cs2.

Are you making sure to record enable the tracks - if you don't, no MIDI data will pass to the VI.

[Julia B]

I'm unable to do this too with the same version on Win XP.

[ossi69]

Getting close
When I select record enable (clicking the red button)I can now hear the instrument, when I have "Default Thru Instrument set to None".
But I am unable to select multiple instruments as "record enable" ie only one instrument is enabled at a time.
I know this is some simple command.... tried it with Ctrl and selecting tracks. (I can select multiple tracks, but it still wont record enable multiple tracks, just one)

Cant wait....

Found it on my own
Simple.... but it took like over 2 weeks.
Thanks for your help.

To enable multiple track record enable: Select all the tracks you want to affect, then hold shift + option while you arm the tracks.

Works great now.

[DigiTechSupt]

Actually you should only need to hold down shift when clicking to record enable multiple tracks.