Please Help 002r S/PDIF output mirroring

[MWP]

I need to mirror the Dig002r outputs to the S/PDIF output.
Here is what I found when I did a search.
S/PDIF mirroring was not included in Pro Tools LE for the Digi 002 and Digi 002 Rack.

S/PDIF mirroring routes the audio signal to the Main, Monitor and headphone outputs as well as the S/PDIF outputs. This routing is not automatic with the Digi 002 as it was with the Digi 001.

It is possible to mirror tracks on the SPDIF output by holding down the control key (mac) or the start key (win) and selecting S/PDIF L & R stereo. You will notice a "+" in the track's output selector now that you have assigned multiple routings. The output will now say Analog 1 & 2 stereo with a "+" sign: + Analog 1 & 2.
To change the outputs of all the audio and auxiliary tracks simultaneously, hold down the control and option key (mac) or the Start and Alt keys (win).

You can control the output level of these tracks by creating an additional Stereo Master fader for the SPDIF output. (File menu > New Track. Create a Stereo Master Fader. Set the output to S/PDIF L & R stereo).
This new Stereo Master fader will control the output going to the S/PDIF output on the Digi 002.
Keywords: DigiSupKW DigiSupKW_Answerbase ; PlatformKW_Undefined ; ArticleID 17480 ; OldAnswerbaseID 25884 ;

Yes, I can get the individual tracks to show up with the + sign but I cannot get the new Master fader to output to the S/PDIF.

Thanks for any help!

Mark

[The Fez]

IM having the same problem. Trying to output the main mix via spdif to my Rosetta. I get optical outs but no spdif at all. Did someone figure this out yet?

[The Fez]

I can't seem to get an output from my spdif outs. Ive tried everything I can think of, but no spdif out. What can I be overlooking? The I/0 looks fine.

[The Fez]

I can't seem to get an output from my spdif outs. Ive tried everything I can think of, but no spdif out. What can I be overlooking? The I/0 looks fine.

[Rail Jon Rogut]

Previous thread

Rail