|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#1
|
|||
|
|||
Punch in recording Pre/Post Roll Loop
I'm trying to convert from Ableton and have one pretty major thing I have not figured out in Pro Tools. I want to loop a track so that I can play lead over several bars until I like the take. I need it to loop to the pre roll point so every time it loops I get to get a feel for the entry point where the lead starts. On the loop currently it returns to the recording insert point not the pre roll position. How do I do this ...thanks!
|
#2
|
||||
|
||||
Re: Punch in recording Pre/Post Roll Loop
Are you loop-recording?(I would) If so, have you set(in Preferences) so Loop Recording automatically creates a new playlist on each pass. After that, assuming you have set the amount of PRE and POST roll you want, are PRE and POST actually enabled? On the Transport section where you set PRE and POST times, Pre-roll and Post-roll need to be highlighted(Ctrl-K toggles them on/off)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#3
|
|||
|
|||
Re: Punch in recording Pre/Post Roll Loop
Thanks...!
Yes pre and post roll are set to 2 and highlighted. It starts at the pre point...records when it hits the insert selection...then once it hits the post roll marker goes back to the when recording insert started NOT the pre roll spot. What I want is for it to loop like that, but instead of going the start of the recording insert it goes back to the pre roll marker which is currently "2" before where the recording insert should start...at least by the entry in the pre roll field in the transport section. |
#4
|
|||
|
|||
Re: Punch in recording Pre/Post Roll Loop
In Pro Tools, on loop record using pre-roll, it only applies to the first "take." It won't go back and pre-roll each loop. That's just the way it is.
What I would suggest is taking your lead-in track and have it on a separate track than your record loop track. On your lead in track, cut where you want to start recording and mute after that (or any number of bars you are covering.) Don't use pre/post roll but highlight the whole selection that would have been your pre/post roll. Then put your record track into loop record. You'll hear the lead in up until where you've cut/mute the clip from that track and on your record track, you can loop record to your heart's content each time hearing your pre/post roll on the loops.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro S1 x 2, Fire Max11 x 2, Dock, iPad Air5 Mac Mini 14,12, 12 core, macOS 13.6.6 RAM 32GB, SSD 4TB, GPU 19 core QNAP TVS-872XT 148TB TB3 Last edited by BScout; 06-17-2019 at 07:37 PM. Reason: re-arranged sentences to follow the order they should be done |
#5
|
|||
|
|||
Re: Punch in recording Pre/Post Roll Loop
That approach makes sense. This was the first thing that while really accomplishing the same thing takes a slightly different approach. I kind of like the way Ableton does that, but PT is proving to be far more straight forward on most things and at least for me...more stable so far.
|
#6
|
||||
|
||||
Re: Punch in recording Pre/Post Roll Loop
Extend the punch in and out area 2 bars either side of the area you want to record. You can cut out what isnt needed later... then you can do as many comps as you like until you happy or take the good bits from several takes and combine into one.
__________________
Rob MBP 15 2018 macOS Big Sur 11.6.8 Touch Bar and ID 2.2GHz 6 core 8 gen Intel Core i7 processor (TBs to 4.1GHz) 32 Gb of 2400MHz DDR4, 1T SSD, Magic Mouse and Keyboard Pro Tools 2022.7 -23.# - HEAT applied, RME Fireface UCX II ........and a bowl of M&M's |
#7
|
|||
|
|||
Re: Punch in recording Pre/Post Roll Loop
Thanks everybody!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Loop record with pre/post roll | Mishabou | Pro Tools 2018 | 1 | 09-19-2018 09:17 PM |
Help with Pre/Post Roll/Punch In/Out | UndergroundLab | Getting Started | 1 | 03-01-2017 04:11 PM |
punch in loop pre roll | pinnacle | Pro Tools 10 | 4 | 09-14-2012 03:19 PM |
Problem with pre/post roll punch-in record | Gene100 | Pro Tools 9 | 2 | 09-08-2011 06:41 AM |
Pre/post roll in loop recording | 6X 2 | Pro Tools TDM Systems (Mac) | 1 | 10-23-2001 10:44 AM |