Can't select PAL/ NTSC

[bitconductor]

The (PAL) session I just tracklayed came up as NTSC on the (HD) system the person who is mixing is on.
I cannot find anywhere to select PAL rather than NTSC on my system. I thought it was somewhere in the Session window, but it isn't. In fact I can't see PAL or NTSC anywhere.
Clock source says See Control Panel.
?

-----
MacBook Pro (Retina, 15-inch, Mid 2015)
Processor 2.8 Ghz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1536 MB
Mac OS Sierra 10.12.2
Pro Tools 12.7.1
Blackmagic Ultrastudio Mini Monitor (Thunderbolt 2)
Avid Artist Mix (Thunderbolt 2 > Ethernet cable)
Nugen Loudness
iZotope RX6

[ShadeTek]

What version of Blackmagic drivers are you using? Go to 11:33 minutes in on this video. You should have that interface in your BM apps.

https://www.youtube.com/watch?v=7MX452_wgZY

[youtube]7MX452_wgZY[/youtube]

[bitconductor]

Originally Posted by ShadeTek

What version of Blackmagic drivers are you using? Go to 11:33 minutes in on this video. You should have that interface in your BM apps.

https://www.youtube.com/watch?v=7MX452_wgZY

[youtube]7MX452_wgZY[/youtube]

That's v interesting - thanks.
I've got Blackmagic Desktop Video Setup (10.8.5) in my Applications folder.
When I opened that up it said it was outputting NTSC so I changed it and did a restart. Hope that fixes the issue though I won't find out until I pass on this session.

[john1192]

Originally Posted by bitconductor

The (PAL) session I just tracklayed came up as NTSC on the (HD) system the person who is mixing is on.
I cannot find anywhere to select PAL rather than NTSC on my system. I thought it was somewhere in the Session window, but it isn't. In fact I can't see PAL or NTSC anywhere.
Clock source says See Control Panel.
?

-----
MacBook Pro (Retina, 15-inch, Mid 2015)
Processor 2.8 Ghz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1536 MB
Mac OS Sierra 10.12.2
Pro Tools 12.7.1
Blackmagic Ultrastudio Mini Monitor (Thunderbolt 2)
Avid Artist Mix (Thunderbolt 2 > Ethernet cable)
Nugen Loudness
iZotope RX6

while you are looking at your BM software .. PAL is 25 frames !!! correct ??