Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-30-2007, 01:20 PM
dwall dwall is offline
Member
 
Join Date: Apr 2007
Posts: 7
Default 882 will not work properly with 888

Hey, I'm hoping someone can help me out with this.

I'm running a TDM (6.4.1) system on Windows XP with a a d24 card and a dsp Farm. My system worked fine with the single 882 I had, however I recently acquired an 888 and I can't seem to get the two devices communicating and working properly.

Right now I've got the 888 connected to the d24, and the 882 to the dsp Farm. I've got the clock on the 882 slaved to the 888, and the unit indicates that it recognizes this, but when I open a session things get a bit screwy. After configuring everything in the hardware setups, I opened up a session only to have the 882 not respond. The unit won't input or output signal, and when opening a session in 48k, the indicator on the 882 still displays 44.1k (the 888 correctly shows 48k).

Any thoughts of why this might be? I've actually tried 2 separate 882s and had the same problem with both, so I don't think the unit(s) is/are broken. Could it be a problem with the 888 (I know the ins and outs on that work fine though)? It seems like it must be a configuration step that I'm not aware of.

Does anyone have any ideas?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I can't get my Mic to work properly Djgman925 macOS 8 08-22-2013 02:53 PM
AudioSuite does not work properly. ali3 Pro Tools M-Powered (Mac) 2 04-15-2009 06:13 PM
session doesn't work properly! kppoykko 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 0 08-31-2007 11:18 AM
reinstall doesn't work properly redwine5 Digidesign Hardware & Software 1 01-10-2007 04:09 PM
Command 8 not work properly webby ProControl, Control|24, Command|8 3 07-21-2005 10:41 AM


All times are GMT -7. The time now is 12:24 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com