bus paths suddenly becoming unavailable

[albee1952]

Ever since PT9 hit, there has been a ghost in the machine regarding IO and bus routing. Open the Setup>IO window and click on the Bus tab. Look for any buses that are routed to outputs(and SHOULD NOT be). UNcheck the right column output connection and your bus should become available again. I am constantly dealing with this and sessions that come to me from other studios. Rumor has it that it will be fixed in PT12....or 13....or

[elicious]

yup. i've added cleaning up the I/O
to my list of routine maintenance items i perform now
when switching systems;
along with getting rid of the "ghost" inputs on trax,
unused regions that aren't selected the first time,
re-setting the window configs every sesh,
checking my slate plugs to see which ones haven't retained their settings;

really, it's like the analog days when you had to re align the machine
before you could roll tape!
e

[right beside]

Originally Posted by redj

Thanks Right Beside !!!

Exactly the same problem here (Protools 10.3.7, OSX 10.6.8).
I thought I was going crazy !!! ... until I read your tip

Thanks for that !

Hey, cool, I'm glad my post made some sense and helped someone.