Digidesign 192 Digital & Apogee Clocking

[Siegfried Meier]

Hey guys,

I have a 192 digital and 4 x AD8000 units here that I’ve got connected together for 32 io on an HD10 system. They are connected as follows:

2 connected via TDIF for 16 io
2 connected via legacy port and Digi8+ card on AD8000 for 16 io

Now, if i set all 4 Apogee units to their respective Ambus cards for sync, everything appears to work perfectly and I get no clocking errors. But, I feel like I should be using wordclock instead in some way but haven’t had any luck...lots of clocking errors...

Can anyone tell me the recommended way to clock these 5 units together?

Thanks!
Sig

[Sugarnutz]

Daisy chain them all with BNC cables starting with your master, either the 192 or one of the Apogees, then make sure the last unit in the chain has a 75 ohm termination resistor. That should take care of it.