|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Using SPDID as a hardware insert - SPDIF is early
Just thought I'd put this here in case anyone else has the same issue, I couldn't find an answer under search. I set up a hardware insert using spdif on an RME interface, and the signal was coming back in early rather than late as it does with analog hardware inserts. The answer is to use the "User +/-" window at the bottom of the insert channel fader in the mix window. Send a short pip to the outboard with it set to 100% dry signal, create an audio track with the spdif on the interface as the input. Record it and compare the recorded track to the original one you sent to the outboard and measure the difference between the position of the start of the signal on both tracks, then enter that into the "User +/-" by clicking on it and typing the number in. In my case it was 1163 samples.
|
#2
|
||||
|
||||
Re: Using SPDID as a hardware insert - SPDIF is early
Good info. Does the value change if you use a different buffer?
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#3
|
|||
|
|||
Re: Using SPDID as a hardware insert - SPDIF is early
Hi, haven't tried with a different buffer size, bit busy but I will at some point soon and report it here first.
|
#4
|
|||
|
|||
Re: Using SPDID as a hardware insert - SPDIF is early
Hi, that's a no - buffer size doesn't change the +/- de;ay amount needed, stays the same for different buffer sizes. I've saved my PCM80 on spdif as a channel preset with the delay.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hardware insert 1&2 cutting off other hardware inserts on aux tracks | Led | Windows | 4 | 12-09-2013 09:19 AM |
How to insert hardware as channel insert | Lqoau | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 3 | 01-19-2012 07:29 AM |
Hardware Insert | teafan | Tips & Tricks | 6 | 12-31-2009 01:20 AM |
Does hardware insert MUST be same I/O ? | nedd | Pro Tools TDM Systems (Mac) | 8 | 03-22-2009 07:42 PM |
Hardware Insert How-to | stormtrooperpez | Pro Tools TDM Systems (Mac) | 1 | 07-17-2002 11:02 PM |