Atmos Audio i/o

[AEHSMU]

Hello,

Pardon this "newbie" question. I teach Pro Tools and we are in the process of setting up a Dolby Atmos workstation.

I have succeeded in getting all the audio channels to respond EXCEPT the L/R.

If anyone is familiar with the ins and outs (pun intended) of this setup, I would be most grateful for advice.

Thanks!
--
A. Eric Heukeshoven, M.S.
Assistant Professor of Music
Director of Music Industry and Jazz Studies
Director of Studio "S"
Saint Mary's University of Minnesota
700 Terrace Heights #1473
Winona, MN 55987-1399
--

[Drew Mazurek]

Moved to Post where the guys that can help are.

[AEHSMU]

Thanks!
--
Eric H.
--

[reichman]

I have succeeded in getting all the audio channels to respond EXCEPT the L/R.

Tell us a little more about your setup. And are the Dolby session templates working ok?

[AEHSMU]

Originally Posted by reichman

Tell us a little more about your setup. And are the Dolby session templates working ok?

I began with the 32 channel template in the current rev. of PT (2018.1) -- not HD.

Assigned all the bus outputs the way I thought they should be in PT i/o settings.

I have a 7.1 configuration being output via a Clarett 8Pre.

Outputs 1 & 2 are the L/R (front) stereo pair.

All channels from 3 to 8 receive and output to the speakers.

(Although, the output didn't come from the speakers I expected.)

1 & 2 show they are receiving the Return from the Renderer in PT, but there's no output.

I can attach a screenshot of the i/o settings later today if that would be helpful.

Thanks!
--
Eric H.
--

[reichman]

AFAIK, you can't run Atmos without PTHD. When you go to Peripherals, what does it say under the Atmos tab? And not to bum you out, but 7.1 is not Atmos. Are you running the Production Suite?

[AEHSMU]

Originally Posted by reichman

AFAIK, you can't run Atmos without PTHD. When you go to Peripherals, what does it say under the Atmos tab? And not to bum you out, but 7.1 is not Atmos. Are you running the Production Suite?

Again, apologies for my naivety.

Yes, I am referring to the Dolby Atmos Production Suite plug-in.
--
Eric H.
--

[minister]

Possibly this helps:

https://www.pro-tools-expert.com/hom...ro-tools-128hd

[AEHSMU]

Originally Posted by minister

Possibly this helps:

https://www.pro-tools-expert.com/hom...ro-tools-128hd

Thanks. I found this info as well. Doesn't describe how PT i/o needs to be setup.
--
Eric H.
--