Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-18-2005, 10:25 PM
STSCRUSHER STSCRUSHER is offline
Member
 
Join Date: Mar 2005
Posts: 43
Default Sandra report

How much is needed from this report to trouble shoot? I'm having problems with buffer increase/decrease errors. I've done everything recomended thus far. This is a reformat and clean installation. Thank you.

Processor >
Model: AMD Athlon(tm) XP 2200+
Speed: 1.80GHz
Model Number: 2200 (estimated)
Performance Rating: PR2603 (estimated)
Cores per Processor: 1 Unit(s)
Threads per Core: 1 Unit(s)
Internal Data Cache: 64kB Synchronous, Write-Back, 2-way set, 64
byte line size
L2 On-board Cache: 256kB ECC Synchronous, Write-Back, 16-way set,
64 byte line size

< Mainboard >
Bus(es): ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
MP Support: 1 Processor(s)
MP APIC: Yes
System BIOS: Phoenix Technologies, LTD 6.00 PG
System: eMachines, Inc. L7VMM2
Mainboard: KM266-8235
Total Memory: 992MB DDR-SDRAM

< Chipset 1 >
Model: Elitegroup Computer Sys VT8375 ProSavageDDR
PM266/KM266 CPU to PCI Bridge
Front Side Bus Speed: 2x 133MHz (266MHz data rate)
Total Memory: 1GB DDR-SDRAM
Shared Memory: 32MB
Memory Bus Speed: 2x 133MHz (266MHz data rate)

< Video System >
Monitor/Panel: Plug and Play Monitor
Adapter: S3 Graphics ProSavageDDR

< Physical Storage Devices >
Removable Drive: Floppy disk drive
Hard Disk: WDC WD1000BB-00CAA1 (93GB)
Hard Disk: LaCie Group SA LaCie 1394 Disk drive LUN 0
IEEE 1394 SBP2 Device
Hard Disk: SEAGATE ST3250823A USB Device
CD-ROM/DVD: SAMSUNG CD-R/RW SW-240B (CD 199X Rd, 40X Wr)
CD-ROM/DVD: SAMSUNG DVD-ROM SD-616T (CD 48X Rd) (DVD 6X
Rd)

< Logical Storage Devices >
1.44MB 3.5" (A:): N/A
Hard Disk (C:): 93GB (86GB, 93% Free Space) (NTFS)
CD-ROM/DVD (D:): N/A
Wusb54gs (E:): 39MB (CDFS)
New volume (G:): 112GB (37GB, 33% Free Space) (NTFS)

< Peripherals >
Serial/Parallel Port(s): 2 COM / 1 LPT
USB Controller/Hub: VIA Rev 5 or later USB Universal Host
Controller
USB Controller/Hub: VIA Rev 5 or later USB Universal Host
Controller
USB Controller/Hub: VIA Rev 5 or later USB Universal Host
Controller
USB Controller/Hub: VIA USB 2.0 Enhanced Host Controller
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB 2.0 Root Hub
USB Controller/Hub: USB Composite Device
USB Controller/Hub: USB Mass Storage Device
FireWire/1394 Controller/Hub: VIA OHCI Compliant IEEE 1394 Host Controller
Keyboard: HID Keyboard Device
Mouse: PS/2 Compatible Mouse
Human Interface: HID-compliant device
Human Interface: HID-compliant consumer control device
Human Interface: HID-compliant consumer control device
Human Interface: USB Human Interface Device
Human Interface: USB Human Interface Device

< MultiMedia Device(s) >
Device: Avance AC'97 Audio for VIA (R) Audio
Controller

< Communication Device(s) >
Device: 56Kbps Internal Modem

< Power Management >
AC Line Status: On-Line

< Operating System(s) >
Windows System: Microsoft Windows XP/2002 Home (Win32 x86)
5.01.2600

< Network Services >
Adapter: Realtek RTL8139 Family PCI Fast Ethernet NIC

< Performance Tips >
Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 2546: Large memory modules should be ECC/Parity.
Tip 2: Double-click tip or press Enter while a tip
is selected for more information about the
tip.

<<< Mainboard Information >>>
--------------------------------------------------------------------------------

< System >
Manufacturer: eMachines, Inc.
Model: L7VMM2
ID: FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

< Mainboard >
Manufacturer: Elitegroup (ECS)
MP Support: 1 Processor(s)
MPS Version: 1.40
Model: KM266-8235
System BIOS: 09/03/2002-KM266-8235-6A6LVE1BC-00
Chipset: VIA KT266/A, KT333/A

< System Memory Controller >
Location: Mainboard
Error Correction Capability: None
Number of Memory Slots: 2
Maximum Installable Memory: 2GB
Bank0/1 - A0: DIMM 512MB
Bank2/3 - A1: DIMM 512MB

< Chipset 1 >
Model: Elitegroup Computer Sys VT8375 ProSavageDDR
PM266/KM266 CPU to PCI Bridge
Bus(es): ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
Front Side Bus Speed: 2x 133MHz (266MHz data rate)
Maximum FSB Speed / Max Memory:2x 133MHz / 2x 133MHz
Width: 64-bit
IO Queue Depth: 4 request(s)

< Chipset 1 Hub Interface >
Type: V-Link
Width: 8-bit
Full Duplex: Yes
Multiplier: 2/1x
Speed: 4x 66MHz (264MHz data rate)
IO Queue Depth: 9 request(s)

< Logical/Chipset 1 Memory Banks >
Bank 0: 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank 1: 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank 2: 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Bank 3: 256MB DDR-SDRAM 2.5-3-3-7 2CMD
Shared Memory: 32MB
Bank Interleave: 4-way
Speed: 2x 133MHz (266MHz data rate)
Multiplier: 1/1x
Width: 64-bit
Power Save Mode: No
Fixed Hole Present: No

< APIC 1 >
Version: 0.03
Speed: 16MHz
Multiplier: 1/2x
Maximum Interrupts: 24
IRQ Handler Engaged: Yes
Enhanced Support: Yes

< Memory Module 1 >
Manufacturer: Samsung
Model: M3 68L6423DTL-CB0
Serial Number: 35510E01
Type: 512MB DDR-SDRAM
Technology: 16x(32Mx8)
Speed: PC2100U 2.5-3-3-6
Date of Manufacture: Tuesday, January 14, 2003
Set Timing @ 133MHz: 2.5-3-3-6
Set Timing @ 100MHz: 2.0-2-2-5

< Memory Module 2 >
Manufacturer: Kingston
Model: K
Serial Number: 51302474
Type: 512MB DDR-SDRAM
Technology: 16x(32Mx8)
Speed: PC2700U 2.5-3-3-7
Date of Manufacture: Saturday, February 19, 2005
Set Timing @ 167MHz: 2.5-3-3-7
Set Timing @ 133MHz: 2.0-2-2-6

< Environment Monitor 1 >
Model: ITE IT8705F LPC
Version: 2.00
Mainboard Specific Support: No

< Temperature Sensor(s) >
Board Temperature: 54.0°C / 129.2°F
CPU Temperature: 40.0°C / 104.0°F

< Cooling Device(s) >
Auto Fan Speed Control: No
Chassis Fan Speed: 4821rpm

< Voltage Sensor(s) >
CPU Voltage: 1.65V
Aux Voltage: 2.50V
+3.3V Voltage: 3.30V
+5V Voltage: 4.76V
+12V Voltage: 12.42V
Standby Voltage: 6.85V
Battery Voltage: 3.39V

< AGP Bus(es) on Hub 1 >
Version: 2.00
Speed: 4x 66MHz (264MHz data rate)
Multiplier: 1/2x
Fast-Writes Enabled: No
Side Band Enabled: No
Side Band Support: Yes
Aperture Size: 64MB

< PCI Bus(es) on Hub 1 >
Version: 2.10
Number of Bridges: 1
PCI Bus 0: PCI (33MHz)
Multiplier: 1/4x

< LPC Hub Controller 1 >
Model: Elitegroup Computer Sys VT8235 PCI to ISA
Bridge
ACPI Power Management Enabled: Yes
Delayed Transaction Supported: Yes
Delayed Transaction Enabled: No
Multiplier: 1/4x
Speed: 8MHz
DMA Multiplier: 1/2x
DMA Speed: 4MHz

< USB Controller 1 >
Model: Elitegroup Computer Sys VT82xxxxx UHCI USB
1.1 Controller (All VIA Chipsets)
Version: 1.10
Interface: UHCI
Channels: 2
Speed: 48MHz
Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled: No

< USB Controller 2 >
Model: Elitegroup Computer Sys VT82xxxxx UHCI USB
1.1 Controller (All VIA Chipsets)
Version: 1.10
Interface: UHCI
Channels: 2
Speed: 48MHz
Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled: No

< USB Controller 3 >
Model: Elitegroup Computer Sys VT82xxxxx UHCI USB
1.1 Controller (All VIA Chipsets)
Version: 1.10
Interface: UHCI
Channels: 2
Speed: 48MHz
Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled: No

< USB Controller 4 >
Model: Elitegroup Computer Sys VT6202/12 USB 2.0
Enhanced Host Controller
Version: 2.00
Specification: 1.00
Interface: EHCI
Channels: 6
Companion Controllers: 3
Supported Speed(s): Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support: 32-bit
Legacy Emulation Enabled: No

< FireWire/1394 Controller 1 >
Model: VIA Technologies Inc VT6306 VIA Fire II IEEE-
1394 OHCI Link Layer Controller
Version: 1.00
Interface: OHCI
Enhanced Support: No
Speed: 400MHz

< System SMBus Controller 1 >
Model: VIA VT823x SMBus
Advanced TCO Mode Enabled: No
Slave Device Enabled: No
PEC Support: No
Speed: 16kHz

< Expansion Slot(s) >
PCI0 (1h): PCI 32-bit +5V PME Full-Length Used (VIA
Technologies Inc VT8633 Apollo Pro 266 CPU to
AGP Controller)
PCI1 (2h): PCI 32-bit +5V PME Full-Length Available
PCI2 (3h): PCI 32-bit +5V PME Full-Length Available
PCI3 (4h): PCI 32-bit +5V PME Full-Length Used
AGP (8h): AGP 32-bit +5V Full-Length Available
(Elitegroup Computer Sys 86C420 ProSavage
DDR)

< Port Connector >
PRIMARY IDE: None - ATA / None
SECONDARY IDE: None - ATA / None
FDD: 8251 FIFO - Floppy Disk / None
COM1: Serial Port 16450 - 9 Pin Dual Inline / DB-9
pin male
COM2: Serial Port 16450 - 9 Pin Dual Inline / DB-9
pin male
LPT1: Parallel Port ECP/EPP - DB-25 pin female / DB-
25 pin female
Keyboard: Keyboard - PS/2 / PS/2
PS/2 Mouse: Mouse - PS/2 / PS/2
USB: USB - None / None

< Performance Tips >
Notice 224: SMBIOS/DMI information may be inaccurate.
Warning 2507: Mainboard has too few memory slots. Upgrading
the memory may be difficult or expensive.
Warning 2508: All memory slots are full. Upgrading the
memory may be difficult or expensive.
Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 2546: Large memory modules should be ECC/Parity.
Warning 2544: System/Video shared memory greatly reduces
performance. Use external video card.
Warning 2518: Mainboard temperature is too high.
Tip 2: Double-click tip or press Enter while a tip
is selected for more information about the
tip.

<<< CPU & BIOS Information >>>
--------------------------------------------------------------------------------

<< CPU 1 [Processor 0, Core 0, Thread 0] >>
< Processor >
Model: AMD Athlon(tm) XP 2200+
Speed: 1.80GHz
Model Number: 2200 (estimated)
Performance Rating: PR2603 (estimated)
Cores per Processor: 1 Unit(s)
Threads per Core: 1 Unit(s)
Package: Socket A PGA
Multiplier: 27/2x
Generation: G7
Name: Duron M8 & Athlon MP/XP & Sempron
(Thoroughbred) 130nm 1.5-2.5GHz+ 1.5-1.65V
Revision/Stepping: 8 / 0 (0)
Stepping Mask: A0
Core Voltage Rating: 1.650V
Maximum Physical / Virtual Add:34-bit / 32-bit
Native Page Size: 4kB

< Co-Processor (FPU) >
Type: Built-in
Revision/Stepping: 8 / 0 (0)

< Processor Cache(s) >
Internal Data Cache: 64kB Synchronous, Write-Back, 2-way set, 64
byte line size
Internal Instruction Cache: 64kB Synchronous, Write-Back, 2-way set, 64
byte line size
L2 On-board Cache: 256kB ECC Synchronous, Write-Back, 16-way set,
64 byte line size
L2 Cache Multiplier: 1/1x (1795MHz)

< Upgradeability >
Socket/Slot: Socket A
Upgrade Interface: ZIF Socket
Supported Speed(s): 2.10GHz+

< Processor Power Management >
Processor Throttling Enabled: Yes
Throttle Range: 50% - 100%

< Environment Monitor 1 >
Model: ITE IT8705F LPC
Version: 2.00
Mainboard Specific Support: No

< Power Rating(s) >
CPU Core Power: 61W (estimated)

< Sensors >
CPU Temperature: 40.0°C / 104.0°F
CPU Voltage: 1.65V

< Features >
FPU - Co-Processor Built-in: Yes
VME - Virtual Mode Extensions: Yes
DE - Debugging Extension: Yes
PSE - Page Size Extension: Yes
TSC - Time Stamp Counter: Yes
MSR - Model Specific Registers:Yes
PAE - Physical Address Extensi:Yes
MCE - Machine Check Exception: Yes
CX8 - Compare & Exchange 8-byt:Yes
APIC - Local APIC Built-in: Yes
SEP - Fast System Call: Yes
MTRR - Memory Type Range Regis:Yes
PGE - Page Global Enable: Yes
MCA - Machine Check Architectu:Yes
PAT - Page Attribute Table: Yes
PSE36 - 36-bit Page Size Exten:Yes
PSN - Unique Serial Number: No
CLF - Cache Line Flush Support:No
DS - Debug Trace & EMON Store: No
ACPI - Software Clock Control: No
(W)MMX Technology: Yes
FXSR - Fast Float Save & Resto:Yes
SSE Technology: Yes
SSE2 Technology: No
SS - Self Snoop: No
HTT - Hyper-Threading Technolo:No
TM - Thermal Monitor: No
PBE - Pending Break Enable: No
SSE3 Technology: No
MON - Monitor/MWait: No
DSCPL - CPL qualified Debug St:No
VMX - Virtual Machine eXtensio:No
EST - Enhanced SpeedStep Techn:No
TM2 - Thermal Monitor 2: No
SSE4 Technology: No
CID - Context ID: No
CX16 - Compare & Exchange 16-b:No
xTPR - Send Task Priority Mess:No
DAZ - Denormals Are Zero: No

< Extended Features >
SYCR - Extended Fast System Ca:Yes
EMMX - Extended MMX Technology:Yes
FXSR - Fast Float Save & Resto:Yes
3DNow! Technology: Yes
Extended 3DNow! Technology: Yes
XD/NX - No-execute Page Protec:No
SMP - MP Capability: No
AMD64/EM64T Technology: No

< Power Management Features >
VID - Voltage Control: No
FID - Frequency Control: No
TS - Thermal Sensor Built-in: Yes

< Advanced Settings >
TLB Cacheable: Yes
System Ack Limit: 4 request(s)
System Victim Limit: 0 request(s)
Extended MTRR Types: Yes
I/O Type Range Registers: Yes
Top of Memory: 3E000000 (992MB)

< Machine Check Architecture Settings >
Number of Reporting Banks: 4 bank(s)
Exception Reporting Control Su:Yes

< Variable Range MTRR Settings >
MTRR 0: 00000000-3FFFFFFF (0MB-1024MB) WB
MTRR 1: 3E000000-3FFFFFFF (992MB-1024MB) UC
MTRR 2: E8000000-EBFFFFFF (3712MB-3776MB) WC
MTRR 5: E8000000-EBFFFFFF (3712MB-3776MB) WC

< Variable Range IORR Settings >
IORR 1: E8000000-EBFFFFFF (3712MB-3776MB) rdMem wrMem

< Fixed Range MTRR Settings >
MTRR 0 Range 0: 00000000-0000FFFF (0kB-64kB) WB rdIO wrIO
MTRR 0 Range 1: 00010000-0001FFFF (64kB-128kB) WB rdIO wrIO
MTRR 0 Range 2: 00020000-0002FFFF (128kB-192kB) WB rdIO wrIO
MTRR 0 Range 3: 00030000-0003FFFF (192kB-256kB) WB rdIO wrIO
MTRR 0 Range 4: 00040000-0004FFFF (256kB-320kB) WB rdIO wrIO
MTRR 0 Range 5: 00050000-0005FFFF (320kB-384kB) WB rdIO wrIO
MTRR 0 Range 6: 00060000-0006FFFF (384kB-448kB) WB rdIO wrIO
MTRR 0 Range 7: 00070000-0007FFFF (448kB-512kB) WB rdIO wrIO
MTRR 1 Range 0: 00080000-00083FFF (512kB-528kB) WB rdIO wrIO
MTRR 1 Range 1: 00084000-00087FFF (528kB-544kB) WB rdIO wrIO
MTRR 1 Range 2: 00088000-0008BFFF (544kB-560kB) WB rdIO wrIO
MTRR 1 Range 3: 0008C000-0008FFFF (560kB-576kB) WB rdIO wrIO
MTRR 1 Range 4: 00090000-00093FFF (576kB-592kB) WB rdIO wrIO
MTRR 1 Range 5: 00094000-00097FFF (592kB-608kB) WB rdIO wrIO
MTRR 1 Range 6: 00098000-0009BFFF (608kB-624kB) WB rdIO wrIO
MTRR 1 Range 7: 0009C000-0009FFFF (624kB-640kB) WB rdIO wrIO
MTRR 2 Range 0: 000A0000-000A3FFF (640kB-656kB) UC rdIO wrIO
MTRR 2 Range 1: 000A4000-000A7FFF (656kB-672kB) UC rdIO wrIO
MTRR 2 Range 2: 000A8000-000ABFFF (672kB-688kB) UC rdIO wrIO
MTRR 2 Range 3: 000AC000-000AFFFF (688kB-704kB) UC rdIO wrIO
MTRR 2 Range 4: 000B0000-000B3FFF (704kB-720kB) UC rdIO wrIO
MTRR 2 Range 5: 000B4000-000B7FFF (720kB-736kB) UC rdIO wrIO
MTRR 2 Range 6: 000B8000-000BBFFF (736kB-752kB) UC rdIO wrIO
MTRR 2 Range 7: 000BC000-000BFFFF (752kB-768kB) UC rdIO wrIO
MTRR 3 Range 0: 000C0000-000C0FFF (768kB-772kB) WP rdIO wrIO
MTRR 3 Range 1: 000C1000-000C1FFF (772kB-776kB) WP rdIO wrIO
MTRR 3 Range 2: 000C2000-000C2FFF (776kB-780kB) WP rdIO wrIO
MTRR 3 Range 3: 000C3000-000C3FFF (780kB-784kB) WP rdIO wrIO
MTRR 3 Range 4: 000C4000-000C4FFF (784kB-788kB) WP rdIO wrIO
MTRR 3 Range 5: 000C5000-000C5FFF (788kB-792kB) WP rdIO wrIO
MTRR 3 Range 6: 000C6000-000C6FFF (792kB-796kB) WP rdIO wrIO
MTRR 3 Range 7: 000C7000-000C7FFF (796kB-800kB) WP rdIO wrIO
MTRR 4 Range 0: 000C8000-000C8FFF (800kB-804kB) UC rdIO wrIO
MTRR 4 Range 1: 000C9000-000C9FFF (804kB-808kB) UC rdIO wrIO
MTRR 4 Range 2: 000CA000-000CAFFF (808kB-812kB) UC rdIO wrIO
MTRR 4 Range 3: 000CB000-000CBFFF (812kB-816kB) UC rdIO wrIO
MTRR 4 Range 4: 000CC000-000CCFFF (816kB-820kB) UC rdIO wrIO
MTRR 4 Range 5: 000CD000-000CDFFF (820kB-824kB) UC rdIO wrIO
MTRR 4 Range 6: 000CE000-000CEFFF (824kB-828kB) UC rdIO wrIO
MTRR 4 Range 7: 000CF000-000CFFFF (828kB-832kB) UC rdIO wrIO
MTRR 5 Range 0: 000D0000-000D0FFF (832kB-836kB) UC rdIO wrIO
MTRR 5 Range 1: 000D1000-000D1FFF (836kB-840kB) UC rdIO wrIO
MTRR 5 Range 2: 000D2000-000D2FFF (840kB-844kB) UC rdIO wrIO
MTRR 5 Range 3: 000D3000-000D3FFF (844kB-848kB) UC rdIO wrIO
MTRR 5 Range 4: 000D4000-000D4FFF (848kB-852kB) UC rdIO wrIO
MTRR 5 Range 5: 000D5000-000D5FFF (852kB-856kB) UC rdIO wrIO
MTRR 5 Range 6: 000D6000-000D6FFF (856kB-860kB) UC rdIO wrIO
MTRR 5 Range 7: 000D7000-000D7FFF (860kB-864kB) UC rdIO wrIO
MTRR 6 Range 0: 000D8000-000D8FFF (864kB-868kB) UC rdIO wrIO
MTRR 6 Range 1: 000D9000-000D9FFF (868kB-872kB) UC rdIO wrIO
MTRR 6 Range 2: 000DA000-000DAFFF (872kB-876kB) UC rdIO wrIO
MTRR 6 Range 3: 000DB000-000DBFFF (876kB-880kB) UC rdIO wrIO
MTRR 6 Range 4: 000DC000-000DCFFF (880kB-884kB) UC rdIO wrIO
MTRR 6 Range 5: 000DD000-000DDFFF (884kB-888kB) UC rdIO wrIO
MTRR 6 Range 6: 000DE000-000DEFFF (888kB-892kB) UC rdIO wrIO
MTRR 6 Range 7: 000DF000-000DFFFF (892kB-896kB) UC rdIO wrIO
MTRR 7 Range 0: 000E0000-000E0FFF (896kB-900kB) WP rdIO wrIO
MTRR 7 Range 1: 000E1000-000E1FFF (900kB-904kB) WP rdIO wrIO
MTRR 7 Range 2: 000E2000-000E2FFF (904kB-908kB) WP rdIO wrIO
MTRR 7 Range 3: 000E3000-000E3FFF (908kB-912kB) WP rdIO wrIO
MTRR 7 Range 4: 000E4000-000E4FFF (912kB-916kB) WP rdIO wrIO
MTRR 7 Range 5: 000E5000-000E5FFF (916kB-920kB) WP rdIO wrIO
MTRR 7 Range 6: 000E6000-000E6FFF (920kB-924kB) WP rdIO wrIO
MTRR 7 Range 7: 000E7000-000E7FFF (924kB-928kB) WP rdIO wrIO
MTRR 8 Range 0: 000E8000-000E8FFF (928kB-932kB) WP rdIO wrIO
MTRR 8 Range 1: 000E9000-000E9FFF (932kB-936kB) WP rdIO wrIO
MTRR 8 Range 2: 000EA000-000EAFFF (936kB-940kB) WP rdIO wrIO
MTRR 8 Range 3: 000EB000-000EBFFF (940kB-944kB) WP rdIO wrIO
MTRR 8 Range 4: 000EC000-000ECFFF (944kB-948kB) WP rdIO wrIO
MTRR 8 Range 5: 000ED000-000EDFFF (948kB-952kB) WP rdIO wrIO
MTRR 8 Range 6: 000EE000-000EEFFF (952kB-956kB) WP rdIO wrIO
MTRR 8 Range 7: 000EF000-000EFFFF (956kB-960kB) WP rdIO wrIO
MTRR 9 Range 0: 000F0000-000F0FFF (960kB-964kB) UC rdIO wrIO
MTRR 9 Range 1: 000F1000-000F1FFF (964kB-968kB) UC rdIO wrIO
MTRR 9 Range 2: 000F2000-000F2FFF (968kB-972kB) UC rdIO wrIO
MTRR 9 Range 3: 000F3000-000F3FFF (972kB-976kB) UC rdIO wrIO
MTRR 9 Range 4: 000F4000-000F4FFF (976kB-980kB) UC rdIO wrIO
MTRR 9 Range 5: 000F5000-000F5FFF (980kB-984kB) UC rdIO wrIO
MTRR 9 Range 6: 000F6000-000F6FFF (984kB-988kB) UC rdIO wrIO
MTRR 9 Range 7: 000F7000-000F7FFF (988kB-992kB) UC rdIO wrIO
MTRR 10 Range 0: 000F8000-000F8FFF (992kB-996kB) UC rdIO wrIO
MTRR 10 Range 1: 000F9000-000F9FFF (996kB-1000kB) UC rdIO wrIO
MTRR 10 Range 2: 000FA000-000FAFFF (1000kB-1004kB) UC rdIO
wrIO
MTRR 10 Range 3: 000FB000-000FBFFF (1004kB-1008kB) UC rdIO
wrIO
MTRR 10 Range 4: 000FC000-000FCFFF (1008kB-1012kB) UC rdIO
wrIO
MTRR 10 Range 5: 000FD000-000FDFFF (1012kB-1016kB) UC rdIO
wrIO
MTRR 10 Range 6: 000FE000-000FEFFF (1016kB-1020kB) UC rdIO
wrIO
MTRR 10 Range 7: 000FF000-000FFFFF (1020kB-1024kB) UC rdIO
wrIO

< PAT Settings >
PAT 0: WB
PAT 1: WC
PAT 2: UC-
PAT 3: UC
PAT 4: WB
PAT 5: WC
PAT 6: UC-
PAT 7: UC

< Performance Tips >
Tip 210: Mainboard supports faster CPUs, so the CPU
can be upgraded when needed.
Notice 224: SMBIOS/DMI information may be inaccurate.
Tip 2: Double-click tip or press Enter while a tip
is selected for more information about the
tip.

<< System BIOS >>
< General Information >
Manufacturer: Phoenix Technologies, LTD
Version: 6.00 PG
Plug & Play Version: 1.00
SMBIOS/DMI Version: 2.20
(EE)PROM Size: 256kB

< General Capabilities >
Can be Updated/Flashed: Yes
Can be Shadowed: Yes
Is Socketed: Yes
Supports Plug & Play: Yes
Supports ESCD: Yes
Supports Enhanced Disk Drive: Yes
NEC PC-98 Spec Compatible: No

< Power Management Features >
Supports APM: Yes
Supports ACPI: Yes
Supports Smart Battery: No

< Boot Features >
Supports Selective Booting: Yes
Supports CD/DVD Boot: Yes
Supports PCMCIA/CardBus Boot: No
Supports LS-120 Boot: Yes
Supports ZIP Boot: Yes
Supports i2o Boot: No
Supports FireWire/1394 Boot: No

< Performance Tips >
Tip 201: System BIOS is old. Check for an update.
Notice 224: SMBIOS/DMI information may be inaccurate.
Tip 207: A SMBIOS/DMI 2.3 or later compliant BIOS is
recommended. Check for a BIOS update.
Tip 212: BIOS can be shadowed so check whether it is.
Tip 211: BIOS is flash-able and socketed so it can be
upgraded when needed.
Tip 2: Double-click tip or press Enter while a tip
is selected for more information about the
tip.
Reply With Quote
  #2  
Old 12-18-2005, 10:32 PM
Rail Jon Rogut Rail Jon Rogut is offline
Member
 
Join Date: Dec 1969
Location: Los Angeles, CA, USA
Posts: 14,490
Default Re: Sandra report

As I posted in your other thread.. you don't have a QUALIFIED FireWire card installed.

Rail
__________________
Platinum Samples
www.platinumsamples.com
Engineered Drums for BFD
••••••••••••••••••••••••••••
Reply With Quote
  #3  
Old 12-18-2005, 11:02 PM
STSCRUSHER STSCRUSHER is offline
Member
 
Join Date: Mar 2005
Posts: 43
Default Re: Sandra report

thanks Rail,

I posted that by accident in the mac forum first. When I realized it, I was putting it in the right forum as you were responding...

Thanks for looking at it! With the hardware buffer increase/decrease errors; is not having a "qualified" firewire port a known issue? For the past two years those have been the only error prompts I've been getting; but have been making it impossible to create a positive work flow. Thanks for your time and help!!!
Reply With Quote
  #4  
Old 12-18-2005, 11:04 PM
Rail Jon Rogut Rail Jon Rogut is offline
Member
 
Join Date: Dec 1969
Location: Los Angeles, CA, USA
Posts: 14,490
Default Re: Sandra report

Yes -- you need a FireWire card which is qualified and has a compatible chipset -- your onboard VIA chipset FireWire card is definately a problem.

You didn't list your Digidesign hardware so I assume you have an 002.

Rail
__________________
Platinum Samples
www.platinumsamples.com
Engineered Drums for BFD
••••••••••••••••••••••••••••
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
sandra report vin7 Windows 3 03-26-2014 03:47 PM
Sandra report mickeyrouse Getting Started 3 01-13-2014 05:57 PM
Sandra Report keithaska 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 5 08-23-2010 12:43 PM
Thanks! Sandra Report stevegrisham 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 8 07-08-2009 09:26 AM
Sandra Report Help Please JCWarrior 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 2 04-09-2007 05:52 AM


All times are GMT -7. The time now is 03:41 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com