Roland TD3 MIDI Setup

[trebot000]

Originally Posted by musicman691

Are you sure the mappings are the same between Kontakt and the TD3? I would download a free MIDI monitor and use that to see exactly what notes the TD3 brain is sending out and then use that to verify things are the same in Kontakt. Something may have changed in the mapping somewheres along the line. Maybe the mapping in the TD3 brain changed somehow?

Thanks for the suggestion. Are there any MIDI monitors you suggest for Windows?

It really is the strangest thing... I see my interface receiving the midi signal from the Td-3 it just never affects Kontakt. I can play the groove player in Kontakt and I get a signal on the track in Pro Tools. It's driving me nuts at this point.

[trebot000]

Originally Posted by nige108

Have you turned local off in the V-Drum module?


Sent from my iPhone using Tapatalk

I don't know of that as an option on the module. I never had to before. I looked and did not see that as an option on the TD-3. I went through the kits just to check and see if I had to be on a certain number... still nothing in Kontakt. My interface is receiving MIDI though.

Thanks

[musicman691]

Originally Posted by trebot000

Thanks for the suggestion. Are there any MIDI monitors you suggest for Windows?

It really is the strangest thing... I see my interface receiving the midi signal from the Td-3 it just never affects Kontakt. I can play the groove player in Kontakt and I get a signal on the track in Pro Tools. It's driving me nuts at this point.

MIDI-ox is the one you want.
Make sure the TD3 brain and Kontakt are communicating on the same MIDI channel.