|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
RME MADIface with Venue
Hi all,
Does anyone know if the MADIface can be used with the new venue MADI card? I note on the MADI card instructions that the venue and MADI device must be sync'd using the BNC wordclock connectors. However, the MADIface does not have wordclock and i believe it uses steadyclock embedded in the MADI signal. Any help would be greatly appreciated on this matter. |
#2
|
||||
|
||||
Re: RME MADIface with Venue
Hi,
Yes, MADIface can be used. The receiving device/DAW will need to be set to clock to the incoming MADI stream (from VENUE). By doing this, you establish a common clock between the VENUE system and the MADIface, so a word clock connection is not required. Sheldon |
#3
|
|||
|
|||
Re: RME MADIface with Venue
Many thanks Sheldon. Is it always best to set the venue as master and madi device as slave?
|
#4
|
||||
|
||||
Re: RME MADIface with Venue
It doesn't matter which device provides the master clock, so long as the two devices use a common clock. THis means the VENEU system can provide the word clock output, or accept the word clock output from another device, if provided.
In the case of the MADIface - which doesn't offer a word clock input or output - clocking to the VENUE MADI stream from VENUE essentially establishes this common clock. Sheldon |
#5
|
|||
|
|||
Re: RME MADIface with Venue
Just FYI:
We tested exactly this setup (MAc/Madiface/Profile/Madi) over fibre for 2 full days last week and found no flaw technically / clock wise |
#6
|
||||
|
||||
Re: RME MADIface with Venue
Alright, I am pulling this one from the archive. Ha! I just purchased an RME MADIface to use with Venue and ProTools 9. However, I can only get 32 channels into ProTools via the MADI connection. Is this correct? Can you not use all 64 (48+16 Assignables) in ProTools?!
__________________
Ken Miller, Jr. Audio Engineer Southside Baptist Church | Warner Robins, GA | VENUE Profile 96X64 with MADI Option | ProTools 7.4.2 HD3 Accel PCI | ProTools 10 Native | MacBook Pro 17" OS 10.7.1 2.3GHz Intel Core i7 8GB Ram | Mbox 2 Pro | Mbox 3 Pro | Motu 896mk3 Hybrid |
|
#7
|
||||
|
||||
Well seems as though I forgot about the 32 track limitation with ProTools. If I invest in Logic Pro, would that allow me to simultaneously record up to 64 channels?
__________________
Ken Miller, Jr. Audio Engineer Southside Baptist Church | Warner Robins, GA | VENUE Profile 96X64 with MADI Option | ProTools 7.4.2 HD3 Accel PCI | ProTools 10 Native | MacBook Pro 17" OS 10.7.1 2.3GHz Intel Core i7 8GB Ram | Mbox 2 Pro | Mbox 3 Pro | Motu 896mk3 Hybrid |
|
#8
|
|||
|
|||
Re: RME MADIface with Venue
yes, it would. So would just about any other daw. my favorite for live tracking is reaper. I then import and mix everything in PT
__________________
Jon Lillie Behind the Light Productions PT 10-CPTK-Motu Traveler v1 Mac Pro 2x2.8GHz Quad-Core, 14gigs of ram Macbook Pro w/Retina Display, 2.3Ghz i7, 16gigs of ram |
#9
|
||||
|
||||
Does Reaper have a track limitation?
__________________
Ken Miller, Jr. Audio Engineer Southside Baptist Church | Warner Robins, GA | VENUE Profile 96X64 with MADI Option | ProTools 7.4.2 HD3 Accel PCI | ProTools 10 Native | MacBook Pro 17" OS 10.7.1 2.3GHz Intel Core i7 8GB Ram | Mbox 2 Pro | Mbox 3 Pro | Motu 896mk3 Hybrid |
|
#10
|
|||
|
|||
Re: RME MADIface with Venue
only limited by the computer being used. ie when you run out of power, you run out of power. I personally have done over 100 tracks... though it was to see if I could, nothing more.
There is a free, unlimited trial. give it a whirl and see if it's worth spending the money. (I thought it was/is)
__________________
Jon Lillie Behind the Light Productions PT 10-CPTK-Motu Traveler v1 Mac Pro 2x2.8GHz Quad-Core, 14gigs of ram Macbook Pro w/Retina Display, 2.3Ghz i7, 16gigs of ram |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro Tools 11.1.2 will not start up with RME Madiface XT | Gaston69 | Third Party Interfaces | 2 | 01-29-2014 08:10 AM |
FS - RME MadiFace+Thunderbolt | benshapiro | Buy & Sell | 2 | 01-16-2014 11:15 AM |
New webinar: Meet the VENUE SC48 Remote System, Stage 48, and VENUE 3 | bobcats | VENUE Live Sound Systems | 2 | 03-24-2012 07:35 AM |
Digico Madi to RME Madiface to Laptop to ProTools 10 | wallygrant | Pro Tools 10 | 3 | 12-06-2011 11:54 AM |
VENUE D-Show 2.8 Standalone Software for VENUE SC48 | Avid | VENUE Live Sound Systems | 0 | 05-13-2009 12:30 AM |