PT 11 and Focusrite Headphone Mixes

[dr_daw]

Originally Posted by nwrstudio

Thank you Christian for the reply. Seeing how I run my control room monitors off of the Pro 40's 1/2 out, could I use the Pro 14's 1/2 out as another cue mix?

Are your two units locked via ADAT? If so, you should be able to use the Pro14's as another out. The one thing I found though with my Octo, is that you can't use the ADAT locked devices as instersts, as the the outputs only mirror the mic pre ins (only the OctoPre Dynamic allows that type of routing)

Try setting your ADAT out 1/2 to the corresponding DAW output of the Aux you set up in PT. Good luck

[Christian.Focusrite]

Hi nwrstudio, Yes you can send another cue mix from the pro 40 to the pro 14 using spdif. On the pro 14 you can use either the mon outs or the line outs 3 and 4

[nwrstudio]

Thank you!