Setting up 002 for the first time

[powerjoe]

First, please allow me to thank all of you for your kind and generous assistance. It is with your help and advice that I finally had a custom computer built to run PTLE with my DIGI 002.

Now, I am setting up for the first time and would like to know the following: (don't laugh)
Also, I have 3 80G WD 7200 Deluxe HD's all on their seperate cable and channel of the Promise controller. The Promise Controller is rated for up to 3 terabytes. No RAID on this bad boy.

1. Should I install PTLE and all the additional software plugins on the same drive that I will be storing and editing PTLE sessions on? Or, should I install all the software on my main "C" or Windows OS drive and use the two other drives just for storage?

2. What should I set my Virtual Memory file size to? I hear this can be a pain.
(I have done an msconfig to remove everything not needed)
3. How much will it help to rid my system of any ethernet adapters?

Here is my system now:
TTGI Black Aluminum case.
Sparkle 400 12V ATX Power Supply.
Asus A7N8X nForce2 DDR400 AGP/LAN/USB2.0 -Mainboard.
2 Kouwell IOFLEX -FW4PCI to FIREWIRE Cards on independant buses.
AMD Athalon XP2700 (2.167GB) 333FSB (retail).
PowerColor Radeon 9000 Gold 128MB.
1024 MB of PC2700 333MHZ DDR RAM.
Lite on 52x/24x/52x/ CD-RW.
3, 80GB Western Digital Special Edition 8MB -Cache 7200 RPM ATA/IDE Hard Drives.
Teac 1.44 floppy.
Lite on 16X DVD-ROM LTD-w/SW.
Promise Ultra 133 TX2 ATA-133 IDE Controller.

So, your thoughts please. I am mainly concerned about where to install the software and the Virtual Memory File Size limit. However, any tips and advice you can offer will be rewarded with a great big smile!

Thanks,