Artist Series connection issues

[hklydian]

Hi, anyone using Artist Control and Artist Mix with OSX10.10?

I installed Eucon 3.2.1 with OSX10.10, both control and mix are connected to the new mac pro's 2 ethernets directly. Only the artist control which connected to ethernet 1 worked fine and the artist mix have no respond. Those control and mix can be found in "All surfaces" but only the control can be added to "my surfaces". Does anyone have the same setting which encountered the same?

[hanksinclair]

I also had many connection problems before.

With the following procedure I got no more crashes and everything is working fine now:

1) Shutting down my Mac and switching OFF the 4 Artist devices
2) Booting Mac, but letting the 4 artist devices be switched OFF
3) Waiting until the EuControl symbol in the menu bar stops spinning
4) Starting Logic X
5) When Logic is up complete, I switch ON only ONE of the Artist Mix devices
6) When this device is ON complete, I switch ON the Artist Control
7) When this device is ON complete, I switch ON second Artist Mix
6) When this device is ON complete, I switch ON the MC Transport

I don't know why this all is working now, but maybe I had IP address conflicts before (when switching ON all 4 devices nearly simultaneously). Or it was the chronological order that has caused the crashes.

Hank

P.S.: I have 4 devices: 2 Mix, 1 Control and 1 Transport. I am working with OS X 10.10.1, EuControl 3.2.1 and Logic 10.1.0.