|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
HD Native/Pro Tools not recognising attached DX32
Hey all,
I am having a strange time trying to get a MacBook Pro up and running with a HD Native card. For whatever reason it won't recognise a DAD DX32 (digital only equivalent of an AX32), BUT DADman and the DX32 recognise the HD Native card's 64 digilink I/O and some nice big green dots indicating sync. The card also passes digitest fine. It just won't appear as an option under system sounds, and whenever I boot protools it flags that "there is no digilink interface attached to HD Native, press ok to scan again, etc." Any idea on what is going on? The digilink cables and DX32 work fine with a HDX card. The same issue is occurring on both a MacBook Pro and 2013 Mac Pro. I have tried two different sonnet TB enclosures with no luck. My only remaining thought is that perhaps it is being caused by a firmware issues? Or... the card is dead. Currently the card is running FPGA firmware version 1.00.4 according to digitest. Would anyone be able to confirm if this is the most recent? Seems like resetting/updating the firmware on the card is a challenge, as the process needs the card to stay powered on during a system restart... which doesn't happen with thunderbolt enclosures.
__________________
Pro Tools Ultimate 2024.3. OSX 13.6.5. Win 10. HD Native. Lynx AES16e. Lynx Aurora 16. i9-13900KF. ASRock Z690 Steel Legend. 64GB Ram. AMD Vega 64. BM Decklink. Dolby Atmos Renderer 5.2. Trinnov D-Mon. D-Command. |
#2
|
|||
|
|||
Re: HD Native/Pro Tools not recognising attached DX32
Did you update the HD drivers?
|
#3
|
|||
|
|||
Re: HD Native/Pro Tools not recognising attached DX32
Yep, its a fresh install on both Mac Pro and MacBook Pro, runnings 2020.11 everything including drivers. Curiously enough, I tried rolling back to 19.6 versions of everything on the MacBook Pro. When Pro Tools boots, it suggests that the HD Native card requires a firmware update but presents a DAE 1 error, followed by a -1166 error when trying to do it. The -1166 error means the system cannot communicate with the HD Native card. TB3 was suggested as the issue in an old thread, so I'm going to try it again today using the Mac Pro and TB2. If that don't work... it is off to find a desktop computer with a PCIe slot. I am starting to understand why Avid discontinued the PCIe version of HD Native!
__________________
Pro Tools Ultimate 2024.3. OSX 13.6.5. Win 10. HD Native. Lynx AES16e. Lynx Aurora 16. i9-13900KF. ASRock Z690 Steel Legend. 64GB Ram. AMD Vega 64. BM Decklink. Dolby Atmos Renderer 5.2. Trinnov D-Mon. D-Command. |
#4
|
||||
|
||||
Re: HD Native/Pro Tools not recognising attached DX32
Probably a dumb question, but... do you have the DigiLink I/O license?
__________________
Janne What we do in life, echoes in eternity. |
#5
|
|||
|
|||
Re: HD Native/Pro Tools not recognising attached DX32
Quote:
Yep. Essentially the entire system works... until I swap a HDX card for a HD Native card.
__________________
Pro Tools Ultimate 2024.3. OSX 13.6.5. Win 10. HD Native. Lynx AES16e. Lynx Aurora 16. i9-13900KF. ASRock Z690 Steel Legend. 64GB Ram. AMD Vega 64. BM Decklink. Dolby Atmos Renderer 5.2. Trinnov D-Mon. D-Command. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Other DAWs Not Recognising HD Native Card [solved] | Aten | Pro Tools HDX & HD Native Systems (Win) | 5 | 05-31-2017 09:39 AM |
Pro Tools 12.6 Not Recognising SD2 | Victor Kennedy | Virtual Instruments | 2 | 10-07-2016 08:22 PM |
Pro Tools is not recognising my 002 | macanudo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 10-18-2006 06:23 AM |
Pro Tools 7 LE not recognising attached Mbox2 | Michael Connell3 | Pro Tools TDM Systems (Mac) | 1 | 06-07-2006 07:57 AM |