PT10HD connection issues.

[j.brantley]

I am trying to connect a Focurite Octo Pre with my 192 digital interface!
I’m also using a Presonus Central Monotoring System to monitor. My system is recognizing the 192 but no signal is showing on the 192 when I tap the mic that I have in channel 1 of the Focurite!


Sent from my iPhone using Tapatalk

[albee1952]

Originally Posted by j.brantley

I am trying to connect a Focurite Octo Pre with my 192 digital interface!
I’m also using a Presonus Central Monotoring System to monitor. My system is recognizing the 192 but no signal is showing on the 192 when I tap the mic that I have in channel 1 of the Focurite!


Sent from my iPhone using Tapatalk

This all happens in the Setup>Hardware menu in Pro Tools. The problem is simply this; the digital IO configuration is not exactly intuitive Indeed, I spent the better part of an afternoon getting this to work and I save screen captures so I could reset if I ever had to start over(which you will if you ever trash prefs without backing them up first). Anyway, Look at the screen capture(I know it says HD IO, but the settings will be the same). You also need to connect a BNC cable from the 192 Wordclock OUT to the Focusrite Wordclock IN and set the Focusrite to external sync. If you can't choose digital settings as shown, go to the DIGITAL tab and select the ADAT option.

[j.brantley]

I’m not seeing an option for analog 1 etc to match yours


Sent from my iPhone using Tapatalk

[j.brantley]

Sent from my iPhone using Tapatalk

[j.brantley]

Sent from my iPhone using Tapatalk

[j.brantley]

I’m so much closer!!! I can see signal coming through finally. Now to get from the 1&2 out and bring up to Presonus Central Station.


Sent from my iPhone using Tapatalk