|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#41
|
|||
|
|||
Re: 10.5 iPad Pro support?
Personally, I just use an older iPad on the dock and keep the iPad Pro for other fun things.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#42
|
|||
|
|||
Re: 10.5 iPad Pro support?
The only reason I got a new one is for the 120hz screen, and faster processor. Those things make a noticeable difference in audio sessions
|
#43
|
|||
|
|||
Re: 10.5 iPad Pro support?
I'm not so sure a 120hz screen is going to be a necessary advantage in the AVID Dock in any case. Seems like overkill, given the intended scope. Just IMO
I guess what I was suggesting previously, is that it may be beneficial to get an older one (iPad) in addition, just for the the dock.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#44
|
||||
|
||||
Re: 10.5 iPad Pro support?
If you use the supplied rake adapter then the power cable will fit, but the lead goes out between the knobs
Sent from my HMA-L29 using Tapatalk |
#45
|
|||
|
|||
Re: 10.5 iPad Pro support?
Yikes, thinking I'll pass on the dock
|
#46
|
|||
|
|||
Re: 10.5 iPad Pro support?
Why? The Dock is fantastic! An iPad Pro is overkill for it's purpose in conjunction with a Dock.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#47
|
||||
|
||||
Re: 10.5 iPad Pro support?
I have to agree, save yourself some money and get a previous model. It would work just the same.
|
#48
|
|||
|
|||
Re: 10.5 iPad Pro support?
If you're redesigning this thing anyway, I hope you'll take some feedback.
The dock works well but it sits the ipad too high, I would personally rather see something like an updated artist control, that's almost flush with the desk and doesn't impede the forward view. The wheel could also be a lot smaller and not prominently featured in the center.. off to the side somewhere, and then you could fit more buttons or faders. |
#49
|
|||
|
|||
Re: 10.5 iPad Pro support?
Quote:
If you take out the current detachable support back, the angle is as low as it could be for comfort of the knobs and view. Quote:
The only thing I never see get used "right" are the touchstrips. Those could have just been more addressable buttons. (which is how I see they get used anyway). And "Input" needs to be added to the fader (for every Eucon device that's missing that)
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#50
|
|||
|
|||
Re: 10.5 iPad Pro support?
Quote:
Your opinion of “viewing angles” is outdated, modern LCDs like the current generation of ipad look just fine when they are viewed from above. The form factor of the artist series was just fine, and you can even raise up the back a little bit. The problem with the dock is that it blocks the main monitor, you would have to raise the monitor up a lot, or put it off to the side, and that sucks. As for giant wheels, have a look at the Akai MPC X for example, or the current generation NI Maschine controller. The wheel is out of the way and just as accessible and useful. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does PT First support Avid Control iPad app? | atkeyboards | Pro Tools | Intro Discussion | 4 | 02-13-2021 03:17 PM |
Support iPad Pro 12.9? | Ray Sean | Avid S1, S3, Dock and Control App | 3 | 09-20-2016 12:57 PM |
iPad Pro 9.7" VS. iPad Air 2 ? | reichman | Avid S1, S3, Dock and Control App | 1 | 08-07-2016 10:46 PM |
Anyone have pics of iPad mini and iPad Air side by side! | Brandonx1 | Avid S1, S3, Dock and Control App | 4 | 06-07-2016 07:03 AM |
Ipad 2 is here! | nst7 | Pro Tools 9 | 17 | 03-03-2011 02:40 PM |