digi002 - how to send from one input to an output?

[JoyMODE101]

hi guys...

well....for now, i had to do my sequencing on my MPC2000XL for my show coming (was gonna run off protools with my powerbook, but didn't have enough time for that)...

anywho...i have an 8-outputs card on my mpc...so i'm going 8 out into the 8 ins of the digi002.

now...i run a click out from my mpc2000 headphone output (by the way, the click volume from the mpc is maxed out) into a headphone amp, then to headphones so our drummer can keep tempo...but he's been complaining that when we start rocking it...he has to TRY to hear the click.

i really don't wanna chance having him not being able to hear it on stage and totally ending up with a mess....so i wanna be able to send the click track INTO the digi002, then OUTPUT it from there into the headphone amp/headphones just so i can have a fader so i can raise even higher just in case he can't hear it.

here's the thing...how do i send the click to a specific out?
i mean...the only output i use are main1/main2, because that's where my speakers are hooked to, but other than that i don't know how to use the other outputs.

can someone help?

sorry for the long explanation, but just wanted to put ya in my shoes.

_chris

[DigiTechSupt]

Create an Aux Input track in Pro Tools. Set it's input to the input that your click is connected to, then select the output that you want it routed out to from the output tab on the track.