Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > FireWire and USB Audio Interfaces (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-19-2016, 08:43 AM
blackpauldays blackpauldays is offline
Member
 
Join Date: Jul 2016
Location: Argentina
Posts: 1
Default M-Audio Fast Track Ultra fisical input 1 appears in VST input 2

Hello everyone: I've been looking around on several forums and support pages but nobody had this problem. Here's the thing: I'm recording using all the 8 inputs on my interface and when adjusting preamp input levels with the Cubase input meters I realized that fisical input 1 level was measured by VST input 2 in the DAW and vice versa. So I checked input routing in VST Connections in case it was changed, but everything were in its place. Then I closed Cubase, turned off audio interface and reboot the laptop. Once was all turned on again, I tried to adjust levels and every fisical input was in its respective VST input. Thought it was solved until few seconds later I saw the same problem on channels 3 & 4!!! As I was only doing some sound test, I didn't worry because audio signals are fine and there's no noise or buzz. But when I need to do the definitive recording the tracks gonna be switched anywhere!
I supose that the external preamp I use on S/PDIF inputs it's guilty for this behaviour or maybe the drivers which aren't updated. Could the preamp wordclock cause this? Or drivers? Please, send me advice to do some tests.

Gear used:
ART DPSII digital preamp
M-Audio Fast Track Ultra 8x8

Last edited by blackpauldays; 07-19-2016 at 11:26 AM. Reason: Add info, correct some words.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
input of 4 mono aux tracks set to same bus... signal only appears in one track jurld Pro Tools 11 Discussion 17 04-14-2016 03:18 PM
No sound on Fast Track Ultra SPDIF input [SOLVED] Nayland FireWire and USB Audio Interfaces (Win) 2 05-30-2014 06:57 AM
Need your input on using Fast Track Pro banjo71 Pro Tools M-Powered (Win) 0 06-19-2012 01:45 PM
5.1 with M-Audio Fast Track Ultra 8R Elby Post - Surround - Video 3 05-25-2012 08:43 AM
audio input tracks sent to one aux track - how do i monitor JUST the aux input track? awhile 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 4 09-17-2010 07:50 AM


All times are GMT -7. The time now is 08:35 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com