Here's how to fix the power harness on your 002r..

[tha k man]

I have a PDF with the proper instructions. I'm happy to email to someone who is able to post it on their website.


mail me if you have a site that you can post it on.

studiobinary @netspace.net.au

[tele_player]

Instructions? You remove about a dozen screws from the bottom panel. Voila!

[tha k man]

Instructions? You remove about a dozen screws from the bottom panel. Voila!

Easy for us, but some folks like colour pictures 'n all. The 002 Fader is a little different - seeing as the PSU is bolted to the bottom plate. The instructions also show how to replace the PSU for those units affected.

[wiseal1]

I'm currently having the same problem clicked on the link and this is what I got .




Forbidden


You don't have permission to access /002rHarnessFix.jpg on this server.


--------------------------------------------------------------------------------

Apache/1.3.33 Server at www.tentenland.net Port 80

I'd would really appreciate being able to view these pictures would make me feel alot more secure about doing this on my own.

[JFreak]

I ponder why these connections are just soldered in the first place.

If they needed to change analog or digital board on the unit, they'd have to unsolder and resolder, which is too much manual work for today's standards. Therefore they helped the possible service job by putting in some connectors.

I have had two power harness issues with my 002R in 3ish years, but if it fails for the third time, I'm going to solder the wires myself.