1176 into my C24

[jloakland]

Hey folks,

I have a C24 and a 192, and I'm trying to hook up my 1176.

I'm using 8 of the c24 pres, and a couple outboard pres into the 192.

Where is the proper place to route a send/return for my 1176. I don't have a patchbay or any other outboard gear...just need the one (for now).

Would I need a db25 to xlrf, and a db25 to xlrm and just use the 9-16 line in and line out in the preamp section of the C24?

Any help would be much appreciated.

[axiom]

If you're looking to use it as an insert, you'd need to come in and out of the 192.

[jloakland]

Ah, thanks Axiom. How would you go about it? I currently have the output of the 192 going to the "Pro Tools In" of the C24. I can obviously get the signal out of the 1176 through the 192, but how to I get the signal in to the 1176 from Pro Tools?

[axiom]

I'd have to look at my C|24 and 192 to see exactly how to do it. My setup has a patch bay. Maybe someone else can chime in with a better answer whether coming line out from the C|24 would work. Sorry I don't know how to do it. In the past I had some AES outboard gear connected directly to the 192.