Need help connecting 888 to HD rig

[Anthonygallo]

ok, Im trying to get one of our old 888's 24b, hooked up to our HD3 rig. This is were I stand...

Ive got ProTools reconizing the 888 and everything is synced up but when i send audio out one of the 888's outs its not metering on the interface.

As far as the 192's go I have the 1st and 2nd llinked to each other in tandem like usual. Then the 888 is connected to the legacy port on the 3rd 192. Does the 888 have to be connected to the 192 that is 1st and on the core card? The reason I ask this is because that worked on our digital rig in the back when we needed this setup.




Any help and ideas are deeply appreciated.

Please help a frantic assistant.

Sorry if i made no sense, just running around like crazy.

[Anthonygallo]

beautiful...loop sync is proprietary to HD..NO [bleep]. My bad...

to anyone who is curious the answer is taking the External word clock from 1st 192 I/O to the 888


sorry to confuse anyone...back to work