PT HD10, Apogee Symphony 64 PCIe, OSX10.8.5 - will this work ?

[rv2]

Hi iam planning to setup a budget used Mac rig... but iam not sure about any driver/osx compatibility issues before i take the plunge...

PT HD10.3.10 used as DAW
Apogee Symphony 64 PCIe
Apogee AD16x & DA16x with X-Symphony addin cards
OSX 10.8.5

will this HW work on OSX10.8.5 ? iam not sure if there are some OSX10.8.5 limitations or if Pro Tools HD10 doesnt limit use of non-avid interfaces somehow... I plan to use Pro Tools HD10 as DAW only with no AVID HW...

i guess my biggest concern is if Pro Tools HD10 play well with Apogee Symphony 64 PCIe without any limitations...

thanks for any answers

[Andrew. D]

Hi There
I have a Thunderbridge which I believe is just a Apogee Symphony 64 PCIe card inside a thunderbolt box which I use with a Symphony I/O which has a "Symphony Mode" that is just like X-Symphony cards you have in your interface.
Both PT 10 & 11 for that matter work fine on 10.8.5. You just need to select the PCIe card as your I/O in the Setup menu.
Not exactly the same, but hopefully helpful anyway.

[Barry Johns]

Why not ditch the Apogee Cards and go with TDM cards? The Apogee AD\DA will work with the TDM Cards.