|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Procontrol ethernet connection problems
Hello, I am trying to hook up a Procontrol main unit and two fader packs to the studio computer. It is running Protools 10HD 10.3.10 on Windows 7 Pro SP1. Fresh install of both so the computer is running great. Using onboard ethernet of Gigabyte GA-EX58-UD3R (rev. 1.6) motherboard. Newest Lan drivers.
Brand new ethernet cables and new 5 port 10/100 Mbps switch. Tried different cables. Not hooked up to anything else, no other network. Ordered a ethernet crossover cable so I can go just to the main unit but it hasn't arrived yet. Digidesign ethernet support driver installed. Saw a post to have just it enabled. Tried that as well as Digi driver and TCP/IP v4 both enabled. Onboard ethernet card seems to be working fine when TCP/IP v4 and digi driver is enabled. Green led on back is lit and yellow led flashes when sending packets. Network switch seems fine. Procontrol units seem to be receiving packets. Green leds lit, yellow led flashing. What am I doing wrong? Will order a new ethernet card but I don't think that is the problem. Seems to be a configuration issue. Any help would be greatly appreciated and I will buy an ice cold Heineken for anybody who can help me fix this problem. In fact, I will buy you a few! Thanks, Alan. |
#2
|
|||
|
|||
have you declared it like this (yes this is a C24 but it's the same procedure)
http://akmedia.digidesign.com/suppor...62.pdf#page=25
__________________
... "Fly High Freeee click psst tic tic tic click Bird Yeah!" - dave911 Thank you, Craig |
#3
|
|||
|
|||
Craig you are a genius! That solved my problem. I am very serious, where can I send that beer to?
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Artist Control / Ethernet Connection and Noise Problems | lberrios1962 | Artist Series | 8 | 05-04-2012 08:20 AM |
C/24 ethernet connection | jmtayloraudio | ICON & C|24 | 3 | 04-23-2010 10:06 AM |
Does gigabit ethernet = problems with ProControl?? | John McDaniel | ProControl, Control|24, Command|8 | 6 | 10-29-2004 01:18 PM |
No Ethernet Connection? | Mark McCabe | ICON & C|24 | 0 | 09-25-2003 11:44 AM |
ProControl and second ethernet card ? | sonicsam | Post - Surround - Video | 3 | 07-05-2003 07:08 AM |