First steps with MTRX Studio

[creativecontrol]

I usually use Beyer DT 770 Pro’s which are 80 ohms and they sound great. Just for extreme comparison I tested a pair of AKG K 240’s and was still able to get enough gain.


best,


Jeff



Sent from my iPhone using Tapatalk Pro

[Goombot]

Great. thanks. If I wanted to get into a headphone amp optically, can I do that from the MTRX?

[Goombot]

or I can get in AES as well. Are either an option? Obviously AES would be better.

[creativecontrol]

MTRX Studio has Dante and ADAT Optical for Digital IO - in addition to DigiLink obviously. If you need AES you could add an Audinate AVIO for example:
AES3 <-> Dante:
https://www.audinate.com/products/de...ante-avio#aes3


Jeff

[Goombot]

Great. That's exactly what I was looking for. Thanks Jeff.

[creativecontrol]

Here's a new video to get folks up and running with MTRX Studio. Hope it is helpful.

https://www.youtube.com/watch?v=sMb91SVVnF4


best,


Jeff

[glogulus2003]

Hi, I’ve got an HDX2 setup with an omni and hdio. I’m going to replace the omni with the mtrx studio and was wondering if this setup should work:

MTRX studio digilink port 1 and 2 to port 1 and 2 of the hdx card 1.
HDIO to port 1 of the the second hdx card. The MTRX and HDIO connected together in a loop.

After reading the documentation this seems like the best configuration to get the most out of this setup. Does this seem reasonable?

[creativecontrol]

Yes that should work just fine. By a Loop, I presume you mean Loop Sync - which is fine. If so, loop sync out of MTRX ST to loop sync in on HDIO to loop sync out of HDIO into loop sync in on MTRX ST. You can also set your MTRX ST to internal and simply send word clock out of it into the word clock on HDIO.


best,


Jeff



Sent from my iPhone using Tapatalk Pro

[glogulus2003]

Originally Posted by creativecontrol

Yes that should work just fine. By a Loop, I presume you mean Loop Sync - which is fine. If so, loop sync out of MTRX ST to loop sync in on HDIO to loop sync out of HDIO into loop sync in on MTRX ST. You can also set your MTRX ST to internal and simply send word clock out of it into the word clock on HDIO.

Thanks for confirming! So exciting!

[glogulus2003]

Originally Posted by creativecontrol

Can you use Hardware Inserts? Absolutely. The only additional step required (from an HD IO for example) is to add the (documented) converter delay into the Hardware Insert Delay field in the IO Setup.

Jeff

Can you provide an example of when, and how, you would do this?