|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Sonarworks Reference 4 - Digi 002r Issues
Hi, does anyone managed to use Sonarworks Reference 4 with a Digi 002r?
For some reason no matter what input/output settings I use I can't get by the initial mic level test. No matter what input level, low, in the ballpark or high I get the same "decrease the input gain on your device" message. Even with the speakers turned off or mic unplugged I get the same message. My guess it's an internal looping issue within the ASIO drivers of Sonarworks. I tired the WASAPI mode, but then the software claims my device is set at 48K while it isn't. I'm on WIN 10 Pro 64Bit 1909, Sonarworks latest version. Any suggestions or how did you get it to work if you had the same issue? Thx |
#2
|
|||
|
|||
Re: Sonarworks Reference 4 - Digi 002r Issues
Unless something's changed, Sonarworks will not work with Digi/Avid interfaces for room calibration setup. Had same problem a few months back trying to do room calibration with an Omni. Sonarworks tech support said to use a different interface as the calibration setup would not work with the Omni. Luckily I had a Focusrite Saffire pro and was able to use that to perform the room calibration with Sonarworks. Once your calibration is completed and saved the Sonarworks plugin works fine in a Protools session using Digi/Avid interface.
|
#3
|
|||
|
|||
Re: Sonarworks Reference 4 - Digi 002r Issues
Quote:
I figured to give it a chance as I liked what the calibration did to my headphones, so I bought the full version with mic. A mic that appears to be apart from the logo and calibration file the exact same mic as my behringer mic. As for other interfaces, I have an old MBox in the closet but assume it wont work either, or a set of converters with external preamps connected to the digi 002 through adat. Buying another interface, just for a one time use sounds a bit crazy to me... Anyway, thx for your help! |
#4
|
|||
|
|||
Re: Sonarworks Reference 4 - Digi 002r Issues
I did the same testing with my old M-Box and got the same issues, so no testing and speaker calibration for me at this point!
In wasapi mode I get the same issue on the input side as well with the M-Box, that is the software claiming the device is set at 48K. Contacted Sonarworks on monday, but it could take up to 2 weeks for a reply they said after submitting... |
#5
|
||||
|
||||
Re: Sonarworks Reference 4 - Digi 002r Issues
FWIW, Sonarworks and I went back and forth for several days as I could not get it to work with my 003 rack. After several emails, they insisted that it was a clock issue with the 003(BTW, the test process MUST be done at 44.1K). I borrowed another interface from a friend and the process went straight thru without a hitch. I can only imagine that if the clock on my 003 is a tad off, then an older 002 could be even further off spec. Now you may still think its Sonarworks and your 002 is fine, because it works, but consider; its a good 15 years old, and built to a price point. At some point, it gets to be time to replace it anyway. My 003 continued to function in a seemingly normal way, but then one day it simply stopped passing audio. It has now been replaced with a Presonus Studio 1810c
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#6
|
|||
|
|||
Re: Sonarworks Reference 4 - Digi 002r Issues
Quote:
As far as upgrading my set-up, I'm upgrading to ORION 32 after I finished and get payed for the current project I'm working on. But then the question is will the calibration work on that as I will be using my console as pre'amp and output controller. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Sonarworks Reference 4 $145 | crandallwarren | Buy & Sell | 1 | 05-24-2020 06:46 AM |
AAE -30001 error w/ Sonarworks reference 4 | stephen.r.banville | Pro Tools 2019 | 11 | 10-17-2019 07:32 AM |
Sonarworks Reference 4 ASIO | Wawili_Sound | Pro Tools 2018 | 2 | 01-22-2019 11:58 PM |
Sonarworks Reference with HD OMNI and HD Native card | abt | AAX Plug-ins | 4 | 11-17-2018 03:25 PM |
known issues for eMac and Digi 002r | ZirLi | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 01-13-2005 08:51 AM |