|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
No Sound w/ Dante Virtual Soundcard
I am running a Dante Virtual Soundcard on an iMac with Pro Tools 11. I know that the DVS is working properly and patched correctly because I am receiving signal in another DAW on this computer. But, it doesn't matter what I do, I cannot get anything in Pro Tools. The I/O says aggregate devise, and I can't find anywhere to change that. In the Setup App, under Hardware Setup, I have changed the audio source to each option, but nothing helps. Does anyone have any ideas of what might fix this problem?
|
#2
|
||||
|
||||
Re: No Sound w/ Dante Virtual Soundcard
In the aggregate I/O set up, did you check the input/output assignments that you want Protools to see? you have to make sure that either the DVS is set as the lone interface, or included as part of the aggregate I/O assignments. I had the same problem and it took forever to figure it out.
Also in the DVS set up, I have found that you need to select the 32x32 options for Protools to recognize the DVS (assuming you have the regular version of PT and not an HD version).
__________________
Justice C. Bigler www.justicebigler.com Lenovo P50: quad-core i7-6820hq, 64GB, 2TB SSD, Win 10 Pro / Protools Ultimate 2023.6 / HD|Native-TB 2018 MacBook Pro: six-core i9, 32GB, 1TB, Monterey / Protools Studio 2023.6, / DVS / DAR, L-ISA Studio Home/mobile: Focusrite Red 8Pre+HD32R / Clarett 4Pre Road/hotel: Roland OctaCaputre / Apogee One |
#3
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
If I can get protools to recognize the DVS in 32x32, will it ever allow me to record 48 DVS channels, or would I need to upgrade to Pro Tools 11 HD for that?
|
#4
|
||||
|
||||
Re: No Sound w/ Dante Virtual Soundcard
Is the DVS selected in the Playback Engine settings?
You need to change it there before you do anything with the I/O settings. |
#5
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
Quote:
|
#6
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
Quote:
Nope on channels. Pro Tools is limited to 32 with an Core Audio interface. If you want to play with Dante with more you channels need to come in via a Focusrite Rednet 5 Dante Interface into a HD Native or HDX card or you could also use a MADI bridge to MADI HD (likely less practical and more expensive). |
#7
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
Hi Guys,
I have been trying to sort a similar problem out for a few days. Pro tools can see DVS and all my outputs are working, but I can't seem to get an input. I've checked though my PT I/o settings and the routing of Dante Controller and as far as I can see everything look correct. Any suggestions? Thanks, Tim |
#8
|
|||
|
|||
No Sound w/ Dante Virtual Soundcard
Quote:
Not much info here. Folks here cannot guess what you think "looks correct" is. How about posting shots of playback engine and IO input/output/bus dialog panels and the IO selectors on say the mix window track you are trying to use. And what input from what interface, what mic/DI box etc., recording what exactly to what track? And what debugging have you done to confirm there is a signal present at that input... (can you monitor it through hardware monitoring for example). What exactly did you do for a few days? Trash prefs? Default all the IO? Try a new empty session? Reinstall any software? (those are the pretty standard steps you should have tried). |
#9
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
Great, and thanks for all the details in the post, sorry I or others here could not help after you went to all that effort. I am curious what you think of that interface.
Sent from my iPhone using Tapatalk |
#10
|
|||
|
|||
Re: No Sound w/ Dante Virtual Soundcard
Quote:
I am loving the unit, well was. Just as I get it all set up and working, racked and hooked up to my preamps, I turned it on last night to hear a large mechanical wurrrrring sound. Something is up so I am currently chatting to Focusrite, I have a band recording scheduled tomorrow ! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Soundcard as sound input | Starting User | macOS | 4 | 02-13-2013 01:05 AM |
Dante issues with PT 10 | AnthonyDW | macOS | 3 | 10-08-2012 03:48 PM |
HELP!! I can't get the sound to work from my Dell soundcard. | jwrivers | Windows | 1 | 08-29-2011 01:51 AM |
Mbox as soundcard for Macs out sound | jensensense | General Discussion | 0 | 09-04-2007 03:24 AM |
Problem using PT SoundCard as default Sound device | toddamo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 10-13-2003 10:30 AM |