Axiom 25 assign transort buttons to pro tools le

[K2warcrew]

does anyone know how to assign the transport buttons on the m-audio axiom 25 midi controller to pro tools. Im using mac osx latest,pro tools le. All drives are current.
Ive search this forum for info and searched all over the internet and found nothing. except other people asking the same quesiton
im using usb connection

[spkguitar]

You must not have searched hard enough; there are literally a TON of posts on this subject on this forum.

Like this one

and this one

and quite a few others.


One thing that might help people help you is which platform are you on; mac or windows?

You will have to program the Axiom to behave like the JL Cooper CS-10 interface, and then install the cs-10 controller profile from the legacy controller download page into Pro Tools.

I have instructions on my webpage for how to do this with the M-Audio Ozonic, and the procedure for the Axiom should be extremely similar. As you can see from the other threads I linked, several people have gotten it up and running this way. Several people could quite work it out, though, so you should pay close attention to the instructions.

If you can wait a week, my Axiom 25 should arrive later this week, and I will post the preset file and instructions after I have loaded my own.

[spkguitar]

Just an update; my Axiom 25 finally arrived (had to re-order it from a different place) and I've created the tutorial page for setting it up, including a preset for Enigma:

How to set up the Axiom 25 to be a control surface for Pro Tools