|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
EUCON Faders Off Command...
When using the Faders Off Command assigned to a key on the S3, it just turn off the S3 faders and sets them to ∞. If I then accidentally touch a S3 fader it will set the fader in Pro Tools to ∞ as well and silence the channel. So in reality it's just the movement off the fader that is off, not the touch function.
Is there a workaround for this behavior? Hans |
#2
|
|||
|
|||
Re: EUCON Faders Off Command...
There are two commands to turn off faders: Faders Off and Suspend All Faders.
Faders Off is a Euconized command and can be put on a softkey on the Control App. You've seen what that does. Suspend All Faders is a toggle switch in Eucontrol > General tab (look at the left column, a little lower than 1/2 way down.) This is the one that actually suspends the faders from sending commands. Unfortunately it is not Euconized yet so you can't put it on a soft key.
__________________
Pro Tools Ult 2024.3, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire HD10 + Max11, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.5 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#3
|
|||
|
|||
Re: EUCON Faders Off Command...
Thanks for the info!
All the best / Hans |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Faders off Eucon command not working | Led | Artist Series | 4 | 07-24-2016 05:39 PM |
Command 8 and Eucon | cananball | Artist Series | 1 | 01-08-2015 02:59 PM |
FS: D-Command ES 24 Faders / like new | Numarek | Buy & Sell | 0 | 04-30-2013 06:12 AM |
D-Command... faders only possible? | Hardin | ICON & C|24 | 2 | 11-21-2011 01:58 PM |
002 and Command 8 faders (not together) | Bixby | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 07-22-2004 08:17 PM |