Getting Roland Vdrums into 192I /O

[PhilS]

My old and feeble mind reaches out to you with active brain cells.
My Roland Vdrum TD-10 outputs +4 dbm (not dBu) nominal. Impedence is 330 ohms and is unbalanced.
If I remember correctly, dbm is roughly 3/4 of dBu, but I would really like to know which input to use and how to set the proper level into my 192.

Go to it folks!

[rojo]

use a mixer. you will be able to match impedance and set levels, maybe even submix and output the proper levels to your 192. It's really handy. you may need some devices similar to a DI if you want to send mic levels to the mixer. Have fun.

[Seller]

I use Digi Mic pre..it has -10 imputs .as well as +4... and my V drums have all the gain you need..........