ProTools 10.3.3 & Digi 002 (not recognized)

[dolebotixstudios]

Originally Posted by JonReznor

Hey, Im having some trouble getting my 002R recognized as well with PT10.
Running a Mac Mini, the 002 is found in AudioMIDISetup, but nothing shows when pro tools launches. Any thoughts? I tried turning on in different orders. ugh. still deciding if this is worth the purchase. this trial isnt going as smoothly as i hoped. still seeing older error codes as well. Thought those days were behind me!

I have also had this issue. I'm running ProTools 10.3.3 on Mac OS 10.6.8 with Model: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s ...... Protools 10 works and runs audio but I can't setup the Digi 002 as a hardware interface. I've tried connecting directly to the digi002 then to a Harddrive and vice versa. I've also done various power sequences and even installed the latest driver for the 002 for ProTools 10.3.3.

[albee1952]

Can you verify that the 002 works? Do you know about the power harness issue? Do you know there are separate drivers for the rack version and mixer version?

[dolebotixstudios]

Originally Posted by albee1952

Can you verify that the 002 works? Do you know about the power harness issue? Do you know there are separate drivers for the rack version and mixer version?

Figured it out... here's what worked:
- Unplugged Digi 002
- Uninstalled Protools 10.3.3
- plugged in Digi 002
- Reinstalled Protools 10.3.3
- Launched Protools (while holding the "n" key)
- Selected "002" for interface
- Selected "Setup>Harware" and selected "002"
- Selected I/O and Remapped the I/O for the 002 in the setups