Help setting up patchnet

[Steven1145]

About the installation manual : there is a reason if these desks were installed by Euphonix reps and not just delivered in boxes. There are a few things that aren't in the manual, that I picked up from the person who installed ours, but it is still a complex piece of gear to get running properly.


sent from my Galaxy S7 Edge

[qtvaudio]

yes they do the calibration shuffle; they just dont pick up a channel

[qtvaudio]

Yes; It would have been great if Avid/Euphonix had set up our system however it's fallen to me; it was sitting in storage for a long time waiting on budget approval which didn't appear to be forthcoming for a considerable time, so we decided to go for it. I've had some good advice from Avid desnagging things, but due to time difference its not always possible to get live support; hence why Ive turned to the forums.
It is complex, but I think I'm making headway. I imagine at some point an Avid engineer will be summoned to approve or condemn my work.

Where I am stuck right now is:

DF66 is still in DHCP, and I can't figure how to set the static IP address in the windows embedded OS that loads from flash memory; if I use NETSH it crashes the computer and just reboots as previously.

Joysticks still not connecting

Waiting on some hardware to set up ProTools, Machine Control and Media Composer for Interplay (I don't anticipate major problems with this)

Thanks

R

[qtvaudio]

Re the joystick unit...should they appear in the startup devices list when eMix starts up?

[Steven1145]

No they don't appear there. Have you checked your coms cables, we're they the ones delivered with the desk?

sent from my Galaxy S7 Edge

[qtvaudio]

Yes they are the ones that were supplied

R

[Steven1145]

You might want to remove the joystick plate from the module to check that the ribbon cables are seated correctly on the joystick PCB.

sent from my Galaxy S7 Edge

[Patzag1]

Originally Posted by Steven1145

The Euphonix DA and AD have an AES in or Out , which is accessed in patchnet as Sources or destination 25 and 26.
I don't know if the extra 4 sockets you refer to are accessible on top of the 24 analog in or out ports.

sent from my Galaxy S7 Edge

I believe these are actually addressed to 27/28. 25/26 are addressed to A1/A2 analog inputs (MA713) and A1/A2 Analog Outputs (MA703).

[Steven1145]

Not on my system.

sent from my Galaxy S7 Edge

[Patzag1]

Originally Posted by Steven1145

Not on my system.

sent from my Galaxy S7 Edge

From the Euphonix MADI Converters Operation Manual

Page 13 (AM713)
MADI Out (BNC): Outputs the digital audio signal.
• 1–24: Analog inputs
• 25–26: Aux analog inputs
• 27–28: Aux digital inputs

Page 15 (MA703)
AM713 and MA703 Converters
MADI In (BNC): Digital audio signal input.
• 1–24: analog outputs
• 25–26: aux analog outputs
• 27–28: aux digital outputs