Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > ProControl, Control|24, Command|8

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-18-2019, 06:54 PM
smashbox smashbox is offline
Member
 
Join Date: Mar 2009
Posts: 50
Default Control 24 expansion chasis

Hey! I've been running PT11 with an Apollo quad. Today I picked up a control 24 on the cheap to use as a controller since Neyrinck released v control. But have been thinking of setting it up as a B studio instead. I'm not familiar with this type of setup and I have a few questions.

The control 24 came with a 64bit expansion chasis with magma card.
It did not include the pci card that goes in the computer. Are these hard to come by?

Also, how exactly would this connect to pro tools 10? Does pro tools 10 simply run off the control 24 over ethernet?

I'm not really sure what I have here or how I would use the expansion chasis? it contains a magma card and some HD core and processor cards. Does it have to run off pt hd ?

I may end up using it as a v control but I'm just wondering what I'd have to do to set this up with pt10 as a second setup for now. Any info would be appreciated.
Attached Images
File Type: jpg 20191018_171737.jpg (92.1 KB, 0 views)
File Type: jpg 20191018_171920.jpg (90.4 KB, 0 views)
Reply With Quote
  #2  
Old 01-20-2020, 12:44 PM
albee1952 albee1952 is offline
Member
 
Join Date: May 2004
Location: nashville
Posts: 35,066
Default Re: Control 24 expansion chasis

The chassis doesn't have any connection to the Control 24. The expansion chassis is holding HD cards (which don't work with Pro Tools 11) so that you could run more cards than will fit in most towers. The chassis/cards should be fine with PT10 HD(or older) but you didn't get all the parts? There should be a card(PCI or PCIe) to go in the main computer, and a cable that connects between the card and the chassis Since you didn't get the card/cable, you'll have some searching to do. I have no experience with those but for sure, you'll need to know the exact model of the chassis so you can search for the right pieces. The Control 24 connects via Ethernet for control. If you want to use the preamps(most people don't), then you need to connect the line outputs(DB25 connections) to compatible IO boxes(second-hand 192's are a good budget option, but make sure they have analog IO. The 192 DIGITAL is not a good option here). In fact, a single 192 with an extra INPUT card would handle all 16 of the Control 24 preamps(but as I sad, few people like them)
__________________
Gigabyte X79/intel i7 3930K, 32GB RAM, DIGI003 Rack
https://www.facebook.com/search/top/...0sound%20works


The better I drink...the more I mix.....

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
expansion chasis help? JT916 Pro Tools TDM Systems (Mac) 6 04-28-2004 10:57 AM
Expansion Chasis for HD5 jerrahi Pro Tools TDM Systems (Mac) 1 08-12-2002 07:33 AM
expansion chasis robby 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 1 04-19-2002 08:22 PM
Expansion Chasis ratz Tips & Tricks 3 03-27-2001 06:29 AM
expansion chasis loutunes Pro Tools TDM Systems (Mac) 6 01-05-2000 05:59 PM


All times are GMT -7. The time now is 10:39 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com