Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support

Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > Third Party Interfaces

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-28-2018, 10:32 AM
Atlanta Engineer Atlanta Engineer is offline
Join Date: Feb 2017
Location: Atlanta, Georgia
Posts: 4
Default Broken 003 Console, What are Replacement Options?

I have a sick 003 console on my hands— (sick like "unhealthy", not like “awesome”) which has firewire issues and is basically unusable at this point. I can test other FW gear on my Mac— hard drives and such-- and it seems fine. I’ve swapped cables— same issue no matter which cable. The 003 usually won’t show up at all, but if it does, it quickly vanishes. Link light on back and on front of the 003 come and go. I’m assuming I have a bad firewire port (or daughter board, or whatever) in the 003. Are these repairable? Even if they are, I need a fast solution— I could buy a used 003, and possibly risk a similar failure, but what are my alternatives?

Here is my setup: right now I’m using an Early 2011 MB Pro as follows:

2.2GHz i7 MB Pro
1TB SSD (internal)
OS 10.11.6

Pro Tools is currently:

I love the look of some of the PreSonus consoles, especially the Studio Live CS 18AI, but I’ve never tried one out, and honestly, I’m not clear which (if any) of these consoles might work. I can't seem to find a list or guideline, so I'm somewhat clueless as to what I need to try now.

I prefer a built-in interface and mic pre’s on the console, because I don’t have a ton of space, though I would like to have 16 channels available at once for mixing without jumping back-and-forth. My brain doesn’t like working with too few faders at once, and I do very much want to retain the moving faders, if possible.

More inputs are a good thing, but generally I’m working with 1 or 2 inputs at once, and mainly building projects a track or two at a time, so I’m not needing 16 mics in at once or such-- at least not right now— I just need more workspace with more faders in front of me at once, if possible.

I’m willing to upgrade to PT 2018, if needed, though PT 12 is working fine for me right now. I just need to figure out a console / interface solution, and quickly.

Suggestions will be greatly appreciated.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
001/v6.4 Life Support / Replacement Options bobe 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 12-29-2012 11:04 AM
003 Best Options For Replacement. philip888 Pro Tools 9 3 11-03-2011 10:58 AM
003 Best Options For Replacement. philip888 Pro Tools 10 18 11-01-2011 12:47 PM
drum replacement / augmentation options studiojimi Pro Tools TDM Systems (Mac) 31 02-02-2010 12:54 PM
Replacement Options for Waves Plug-Ins... soundlife2 Pro Tools TDM Systems (Mac) 54 11-30-2005 09:39 AM

All times are GMT -7. The time now is 02:44 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com