Windows 7 ProControl Drivers?

[Okeefe415]

I'm running PT8 LE, and just got my hand on a ProControl. I fully tested it on a Mac, and everything works just fine.

However, when attempting to setup the device in PT, I get an error when selecting the device along the lines of "Failed to load device profile ProControl" (can't recall the exact error, so take it with a grain of salt).

My question is this, are there any specific driver sets I need to install it?

I've checked around the forums, and can't find a specific answer, just vague conversations about driver support...

Thanks!

[YYR123]

Wasn't a Pro Control a HD only setup ? Maybe I'm wrong but I thought it was a card only rig

[Okeefe415]

It is compatible with PT LE. The issue is getting my hands on the Windows drivers that go inside of the drivers directory in the Digidesign folder.

[Southsidemusic]

No cards or HD needed.

Just look at this thread and make sure you have everything installed correctly.

http://duc.avid.com/showthread.php?t=147395

Originally Posted by NewDave

I run 7.1 LE with a PC.
Works great!

I had to copy some .bundle files from and older LE install to make it work. but it was easy and almost self explained.

dpasch(at)gmail.com if you get stuck!


Good luck!

D

[Okeefe415]

Originally Posted by Southsidemusic

No cards or HD needed.

Just look at this thread and make sure you have everything installed correctly.

http://duc.avid.com/showthread.php?t=147395

I know where to place the dll's, etc., and how to install them. The issue I'm having is I don't have the files, nor can I locate the most up to date versions.

[Southsidemusic]

Originally Posted by Okeefe415

I know where to place the dll's, etc., and how to install them. The issue I'm having is I don't have the files, nor can I locate the most up to date versions.

Got it.

Hopefully someone here can send them to you but this is from Avid website so you know :


Notes:
Digidesign D-Control, D-Control ES, and D-Control Fader Packs are only compatible with Pro Tools|HD and Pro Tools|HD Accel systems.
Digidesign D-Command and D-Command Fader Pack are only compatible with Pro Tools|HD and Pro Tools|HD Accel systems.
Digidesign ProControl, FaderPack for ProControl and EditPack for ProControl are only compatible with TDM systems.
D-Control and ProControl control surfaces are are not compatible with Pro Tools LE systems