Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Mixing > ICON & C|24

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-08-2018, 01:35 PM
Raoul23 Raoul23 is offline
Member
 
Join Date: Oct 2009
Location: UK
Posts: 3,064
Default C24 jittery fader

Noticed today that fader 1 on my c24 is a little jittery. When at 0 it’s not at zero on the desk. Every now and then it jitters. I’ve used the utility button to recalibrate the faders but it’s still the same. Anybody no how to fix this please. Have I got to replace fader or is there a simple solution ??


Sent from my iPhone using Tapatalk
__________________
Raoul Crane
www.blaze-studios.co.uk

PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis
Reply With Quote
  #2  
Old 11-08-2018, 08:23 PM
albee1952's Avatar
albee1952 albee1952 is online now
Member
 
Join Date: May 2004
Location: Norwich, CT
Posts: 39,309
Default Re: C24 jittery fader

I think the answer is.....maybe. If its possible to get the unit flipped over, I would remove the bottom tin and re-seat the little connector for that fader, but before doing that, make sure that the fader cap is clean(no gunk to prevent the sensing of skin capacitance) solid on the shaft and has nothing stuffed in the slot(like tape or paper to tighten a loose fader cap). Reason being that the caps are conductive and sense skin capacitance, which requires a solid earth ground for the C24(which it seems you have since 23 faders are working fine) and the cap(s) need a solid connection to the pot shaft(or whatever we should call the flat metal tang that sticks up thru the fader slot). To get a sense of what a bad ground or failure of the cap's sensitivity to your skin, try to move a fader with a pencil or by pushing with only your fingernail(maybe try this on a working fader to compare how it reacts against the jittery one). A replacement is probably very affordable and easy to replace yourself, once you get the unit turned over for access
__________________
HP Z4 workstation, Mbox Studio
https://www.facebook.com/search/top/...0sound%20works


The better I drink, the more I mix

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote
  #3  
Old 11-09-2018, 06:34 AM
Rich Breen Rich Breen is online now
Member
 
Join Date: Dec 1969
Location: Burbank, CA USA
Posts: 2,381
Default Re: C24 jittery fader

If you're gonna go to the trouble of opening it up, just save yourself more pain and buy a couple of spare faders before hand - you will almost certainly have to replace it, and the job of opening the C24 is so onerous due to the excessive number screw count on the back, that it just makes no sense to do that job twice.
__________________
http://www.richbreen.com

----------------------------------------
Mac Studio / Ventura, PT 2023.12.HDX, Avid HD I/Os and Metric Halo ULN8, 3xS1/Dock
Also running a Mac Studio Ultra / Ventura / HDX / MTRX / S6
Reply With Quote
  #4  
Old 11-09-2018, 12:54 PM
Raoul23 Raoul23 is offline
Member
 
Join Date: Oct 2009
Location: UK
Posts: 3,064
Default Re: C24 jittery fader

Thank you guys for chiming in. Replacement fader is £35 so nothing major. I made a video of the issue so you can see if there is a way to resolve the issue without replacing the fader.

https://youtu.be/kG_2oyuceWo


Sent from my iPhone using Tapatalk
__________________
Raoul Crane
www.blaze-studios.co.uk

PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis
Reply With Quote
  #5  
Old 11-14-2018, 01:50 PM
Rattleshock Rattleshock is offline
Member
 
Join Date: Aug 2003
Posts: 33
Default Re: C24 jittery fader

I have replaced faders on mine, and it is really dead simple, although quite a process to remove the bottom plate to get access to the inside. Each fader has one connector to the internal board and 2 mounting hex screws. I have also cleaned all 24 of my faders which made a huge difference in response. Takes about 10 minutes per fader to take it apart and clean the track and the brush guides that the fader travels along. It was surprising how much lint and grime was in there, especially considering that it's sealed quite well. After a long night of cleaning and replacing 2 dead faders, it works and feels like a brand new console. Make this a yearly maintenance task, and always keep at least one spare fader on hand. The C|24 uses the same faders as the AVID SC48 Venue console. So if you can't find any specific faders for the C|24, search for AVID SC48 replacement faders. Should cost about $50.00 each.

Cheers.
Reply With Quote
  #6  
Old 11-14-2018, 01:54 PM
Raoul23 Raoul23 is offline
Member
 
Join Date: Oct 2009
Location: UK
Posts: 3,064
Default Re: C24 jittery fader

Thanks Rattleshock.

What did you use to clean the faders??


Sent from my iPhone using Tapatalk
__________________
Raoul Crane
www.blaze-studios.co.uk

PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis
Reply With Quote
  #7  
Old 11-14-2018, 02:09 PM
Rattleshock Rattleshock is offline
Member
 
Join Date: Aug 2003
Posts: 33
Default Re: C24 jittery fader

I used micro tweezers to lift out lint, and used paper towel and isopropyl alcohol on the main fader tracking plate. I would avoid any of the regular lubricants, such as CAIG F5 etc. These faders are much different than the ones that were in my Pro Control. Those faders slid on 1/4" round rails. The CAIG F5 fader lube worked well there. The C24 faders are completely different.

Isopropyl Alcohol, tweezers, compressed air and paper towel.
Reply With Quote
  #8  
Old 11-14-2018, 02:13 PM
Rattleshock Rattleshock is offline
Member
 
Join Date: Aug 2003
Posts: 33
Default Re: C24 jittery fader

A couple of great detailed videos showcasing how to clean the C24 faders:

https://www.youtube.com/watch?v=iACS9AELf4s
https://www.youtube.com/watch?v=lfGVSB3bnAE
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Jittery system with PT 2018.x legreg6 Pro Tools 2018 5 08-08-2018 08:12 AM
QT gets jittery in 7.4cs3 Frank Kruse Post - Surround - Video 22 12-09-2009 06:03 AM
Jittery mouse. rqstudio 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 7 04-08-2009 07:14 PM
C8 Fader Bug (NOT the jittery problem...) Chris Coleman ProControl, Control|24, Command|8 1 07-30-2004 06:16 AM
Jittery Faders Fran H 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 0 02-11-2003 01:09 PM


All times are GMT -7. The time now is 08:33 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com