Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support

Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Mac)

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-16-2008, 07:06 PM
Table Syrup Records's Avatar
Table Syrup Records Table Syrup Records is offline
Join Date: Jul 2007
Location: Minneapolis
Posts: 1,485
Default Mix Core, DSP Farm QE, 6.4.1 TdM on 10.3.4 - Farm not shown

I have a few quick questions but I'll start with my config:
(Sorry in advance for the ignorance..... these are the last things I think I'll need)

I have a G4 Quicksilver MDD 867 Dual with 512 MB RAM and OS 10.3.4

Pro Tools 6.4.1 TDM

Mix Core (PCI slot 1? Next to AGP)
DSP Farm QE (PCI slot 2? Next to slot 1?)
Linked with 5 Node TDM Ribbon

1622 i/o on Core
882 i/o on Farm

Digitest only shows the Mix Core.

Amber and Red LED's are lit on the Mix and I can arm all 16 channels and record fine. One Green LED is lit on the DSP.

I am aware that DSP Farm AMCC Chip revisions prior to QC will not work in a Mix System (Or in a G4), and therefore I kept my QE.

Am I in any way mistaken as to the 'Qualified' nature of my setup? I know the DSP is not DIRECTLY qualified, but thought that it worked.

My aim is to have 32 Channels I/O with my 1622, and (2) 882's - (For live recording in a Nightclub in Minneapolis.)

I thought I could run a Mix Core (On the 1622), and (2) 882's each on their own DSP or Farm (In which case I'd buy another card).


Am I missing something? Is this set up right and should it be seeing the DSP?
(I haven't confirmed the DSP works and have no other means of testing beyond what I've done or know so far)

Does it matter which way the TDM Ribbon is on? i.e. Red lead one way or the other, etc? - it fits either way.

A Mix Core doesn't support more than 16 Channels correct? I know there's a 'Y' cable but I'm assuming it's 8 per side?

If I'm not mistaken, DSP Farms support 8 Channels?

Do Mix Farms support 16 Channels? In which case, I could 'Y' cable to each of my 882's correct?

I'm just a little confused as to not seeing the DSP and I'm not sure if I'm supposed to manually configure it somehow.

Thanx Guys and Gals!
Shorty: Table Syrup Records

Mac Pro 5,1 3.33 GHz Hex, 32GB
EFI Flashed - 5 GT/s Modded 7950, Dual Apple 23"
OSX Sierra
Pro Tools HD 11.2.2
Waves IOS, IOX, STG2412
Extreme Server (x2)
Logic Pro X, DSP Quattro, Final Cut Pro X
Waves Mercury+SSL+AbbeyRoads
Trident S65 with embedded US-2400

2012 Mac Mini, Dual SSD, i7 2.4, 16GB
Win 10, OSX Sierra
Hardware from above (same gear)
Dual Dell P2418HT Touch Screens
Waves Icon X (x2), M, with Screens
Custom enclosure
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amp Farm / Echo Farm Stop Passing Signal heavymoe Pro Tools TDM Systems (Mac) 3 11-24-2009 09:00 AM
d24 + mixfarm + dsp farm - losing I/O on mix farm w/64 voic Chris Watkins Digidesign Hardware & Software 3 10-14-2007 09:39 PM
Amp farm 3 ilok auth. "AMP FARM TDM HD"? confirm! crizdee Pro Tools TDM Systems (Mac) 1 11-19-2005 10:06 AM
Power of a DSP farm compared to Mix farm? Realistically. Heaven Pro Tools TDM Systems (Mac) 5 06-16-2002 09:34 AM
MIX Core, MIX Farm, DSP Farm & G4 933MHz Chief Technician Pro Tools TDM Systems (Mac) 6 04-25-2002 06:59 AM

All times are GMT -7. The time now is 03:27 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com