midi setup

[Remco]

Ok, here's what I got:

-masterkeyboard (1 midi in|out|through)
-module XV3080 (1 midi in|out|through)
-Alesis DM4 (1 midi in|out|through)
-PC with Logic audio; I'd like to use logic as a module using the B4, pro52 and Exs24 and the ev88 (vst)instrument plugins (1 midi in | out)
-I've got an Opcode Studio 64x midi-interface connected to a G4 with Protools TDM
(4x midi in | 6 x midi out)

Can anyone help me to get the best setup here, atleast the most permanent one without switching cable etc.

Thanks in advance

Remco

[Chris Lambrechts]

well .... just connect everything in/out with the studio 64 ..... for example :

masterkeyboard : in/out 1
Roland XV : in/out 2
etc ....

and then you have to decide wether you want to run logic using OMS or its own midi protocol.

create a basic setup .... very easy with OMS for example .... just follow instructions in the manual and you should be ok.

good luck

[Remco]

Thanks (dank je),

It looks really simple that way, I made it sound harder than it really is.

Remco

[Gil Parente]

definetely, the so called "hand shake" is the way to go with your set up. good luck